Match of Sherwin Williams™ 49647 *

The Safety Data Sheet is tied to the specific MyPerfectColor paint product you order, not to the Sherwin Williams 49647 color name alone. To get the correct SDS, use the MyPerfectColor Safety Data Sheets page for the exact product format you are buying, such as spray paint or another matched coating.

If you are comparing products, make sure the SDS matches the MyPerfectColor item you plan to use, since different coating types can have different safety information.

Yes, MyPerfectColor spray paint matched to Sherwin Williams 49647 can work on many plastics, but plastic types vary a lot. Because adhesion can differ from one plastic to another, test on the actual item first whenever possible.

If you want better adhesion on a difficult plastic, use the MyPerfectColor primer for Acrylic Enamel before applying the color coat. Clean the part well, remove any release agents or oils, and follow with a test area before coating the full piece.

MyPerfectColor spray paint matched to Sherwin Williams 49647 is typically dry to the touch within minutes. Plan to recoat in about 1 to 2 hours, then allow about two weeks for full cure and handling strength.

Dry to the touch, ready to recoat, and fully cured are different stages. If the part will be handled, assembled, or stacked, wait for the coating to fully cure to reduce marking or damage.

MyPerfectColor spray paint matched to Sherwin Williams 49647 is a practical choice for baskets, frames, furniture accents, shelving, decor pieces, and other small items where spray application is easier than brushing.

It is also useful for coordinated parts such as brackets, knobs, hardware, or removable pieces that need to match a known color reference. Choose the product format based on the object, surface, and how much control you need during application.

Yes. Finish and sheen affect how much light the coating reflects, so the same match of Sherwin Williams 49647 can look different on the finished item depending on the coating finish and the substrate underneath it.

If you are matching a nearby painted part or a specific installed surface, the finish choice can matter as much as the color itself. Select the finish that fits the project requirements, then test on the actual material when appearance sensitivity is high.

MyPerfectColor has an original sample of the Sherwin Williams 49647 in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams 49647. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams 49647, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.