Match of Sherwin Williams™ 50575 *

Yes. MyPerfectColor can make a spray paint match of Sherwin Williams 50575 for many small parts and fixtures where a smooth sprayed finish is easier than brushing. That can include switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar items.

For the best result, make sure the part is clean and prepared for spray application, and test the coating on the actual material before finishing the full item. The same 50575 match can look different depending on the substrate and the finish you order.

The Safety Data Sheet is tied to the MyPerfectColor product and its chemistry, not to the Sherwin Williams 50575 color name by itself. If you need the SDS for the MyPerfectColor paint matched to 50575, use the MyPerfectColor Safety Data Sheets page at https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm.

If you are checking safety information before ordering, confirm that you are looking at the SDS for the specific MyPerfectColor product format you plan to use.

Confirm Sherwin Williams 50575 from a physical brand swatch, an original sample, or a known existing color reference rather than from a screen alone. MyPerfectColor matches to the original brand color reference, so the most important step is making sure the target color is correct before you order.

If the part or surface already exists, compare it to the actual reference you want to reproduce and not just a photo, since lighting and device settings can change what you see.

Yes. The same Sherwin Williams 50575 color can read differently in matte, satin, semi-gloss, or gloss because finish changes how light reflects off the surface. A finish change does not mean the color formula changed, but it can still change the way the applied coating appears.

If you need the new part to sit near another finished item, choose the finish carefully because sheen differences can be noticeable even when the color match is correct.

Start with a clean, dry surface. Remove dirt, grease, wax, and loose coating, then lightly scuff where appropriate so the paint can grip better. Mask off areas that should not be coated, and test the Sherwin Williams 50575 match on the actual surface before doing the full job.

Prep matters because the same color can behave differently on metal, plastic, wood, or a previously coated part. Good preparation helps reduce adhesion problems and gives you a better sense of how the final 50575 match will look after it dries.

MyPerfectColor has an original sample of the Sherwin Williams 50575 in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams 50575. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams 50575, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.