70% of Orders Ship within 3 Business Days.
Match of US Government™ AMS-STD-595 20090 *
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
Ready to purchase? Select your options in the 4 steps below.
A match of US Government AMS-STD-595 20090 is a dark, muted brown with a slightly warm cast and low chroma. It reads earthy rather than vivid, with a subdued character that can look deeper or flatter depending on sheen and substrate.
For government-standard work, MyPerfectColor supplies a custom-matched paint to the selected AMS-STD-595 reference, not an official government-issued coating system. The code gives a color target, but it does not define gloss, chemistry, or how an aged in-service part will read after weathering or use. If you are matching an existing part, the surrounding finish condition can matter as much as the code itself.
MyPerfectColor custom spray paint in this color can be used on brackets, control panels, equipment housings, cabinet doors, switch covers, pipe supports, rails, fabricated steel parts, carts, and maintenance fixtures where a specified brown reference is needed. It also fits restoration, prototyping, training aids, and color-coded hardware when multiple components need to stay aligned to the same government color standard.
Because this is a dark, low-LRV color, surface texture, film build, and sheen variation can be noticeable, especially on smooth metal or molded plastic. Uneven prep or thin coverage may change the final read, and adjacent touch-up work can show differences in aging or gloss even when the code match is correct. When the finish is acceptance-sensitive, a sample panel or comparison to the existing part may help confirm the result.
Similar colors:
Product Data
Perfect Color Ventures LLC DUNS Number and CAGE Code
MyPerfectColor DUNS Number: 117438928
MyPerfectColor CAGE Code: 8SUA4
MyPerfectColor is compliant with section 889. Download the Record of Section 889 Representations PERFECT COLOR VENTURES LLC.
About US Government Federal Standard (now Aerospace Material Specification / AMS) 595 Colors. Fed-Std-595C / FED STD 595 Colors
The Federal Standard (now Aerospace Material Specification / AMS) 595 colors are used to specify colors for US Government applications. The color are used by the US Government agencies, branches and suppliers. The most common requests we receive for Fed Standard Colors are for spray paint, Direct to Metal and other paints for prototyping, marking and identification and touchup applications. Typical clients include the USCG, all branches of the Armed Services, the State Department, Lockheed Martin and Boeing. For example, we provided paint to the Navy for marking shells with the specific Fed Std color designated to identify the type of round.
We offer 5 standard sheens in our lacquer touchup paint: flat, low lustre, satin, semi-gloss or gloss. We also offer a full range of Alkyd and Acrylic Direct To Metal paints. Please contact us if you have any questions. Please submit RFQs to [email protected]
The colors in the Federal Standard set have no official names and are identified by five-digits. The numbers designate the sheen, color classification and color intensity.
The first digit will be 1,2 or 3 and indicates the level of sheen:
1 = gloss
2 = semi gloss
3 = matt
The second digit indicates the color group;
0 = Brown 5 = Blue
1 = Red 6 = Grey
2 = Orange 7 = Other (white, black, violet, metallic)
3 = Yellow 8 = Fluorescent
4 = Green
The third to fifth digits indicate the intensity. Lower numbers indicates a darker color and higher numbers indicate a lighter color.
While the Fed Std colors indicate sheen as part of the 5 digits, MyPerfectColor still requires you to enter a specific sheen. For example, the color Fed Std 37038 technically refers to a matte finish, but MyPerfectColor offers it in any sheen.
Frequently Asked Questions About Match of US Government™ AMS-STD-595 20090 *
What does AMS-STD-595 20090 specify, and what does it not specify?
AMS-STD-595 20090 specifies a government color reference target. It helps identify the color to match, but it does not by itself define paint chemistry, gloss level, surface preparation, corrosion system, or formal approval status for your project.
MyPerfectColor supplies custom-matched paint made to match the selected reference, but the coating system still has to be chosen based on the job requirements.
Will a match to AMS-STD-595 20090 blend with an older in-service coating?
Not always. A correct match to AMS-STD-595 20090 can still look different beside an older coating because weathering, fade, sheen, texture, and prior repaint work all affect the finished appearance.
If the repair must blend into an existing part, compare against the actual surface or a sample panel. For new parts or a full-part repaint, matching the standard reference is usually the better starting point.
How does finish affect the look of AMS-STD-595 20090 after application?
Finish can change how AMS-STD-595 20090 looks after it is applied. Gloss, matte, satin, texture, and film build all affect how light reflects from the surface, so the same color reference can appear different in different coating systems.
The color code alone does not define the final appearance. If the finish matters to the project, choose the correct coating system and confirm the sheen and application method before you order.
How should I prepare metal or existing coatings before applying AMS-STD-595 20090?
Clean and degrease the surface first, then remove corrosion and scuff any sound existing coating so the new material can bond properly. If the project calls for primer, use one that fits the substrate and the coating system you plan to apply.
Mixed substrates and older coatings can change both adhesion and appearance, so testing AMS-STD-595 20090 on the actual part or on a sample panel is a practical way to reduce risk before doing the full job.
What kinds of projects commonly use AMS-STD-595 20090?
A match to AMS-STD-595 20090 is commonly used for equipment panels, brackets, housings, enclosures, carts, fixtures, color-coded hardware, prototypes, mock-ups, and maintenance touch-up work.
It is a good fit when the job is specification-driven and needs a repeatable government color reference. MyPerfectColor custom-matched paint is available for this kind of project in formats suited to the part and application method.
When will I receive my paint matching US Government AMS-STD-595 20090? Can I get it right away?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match US Government AMS-STD-595 20090 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
What are the LRV, HEX, and RGB values for the US Government AMS-STD-595 20090?
The RGB values for US Government AMS-STD-595 20090 are 101, 79, 65 and the HEX code is #654F41. The LRV for US Government AMS-STD-595 20090 is 8.73. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors and Light Reflectance Values.
What paint type is used to make spray paint matched to US Government AMS-STD-595 20090? And how many spray cans do I need?
MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to US Government AMS-STD-595 20090 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
Does US Government paint color US Government AMS-STD-595 20090 need primer?
MyPerfectColor doesn't sell US Government paint, but it does match the US Government AMS-STD-595 20090 and all the other US Government colors in a wide variety of paint types. The need for primer depends on the specific paint and the substrate being painted. The top quality paints these days tend to be self-priming over most surfaces, while paint at the mid to lower grade quality levels will need a separate primer. Most special situations such as bleeding type woods or difficult to adhere surfaces like plastic will often need a specialty primer. Contact MyPerfectColor support if you have specific questions about the best paint to use for your project and whether you need a primer.
How do I buy paint in the US Government AMS-STD-595 20090?
Many types of paint are available for US Government AMS-STD-595 20090 with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to US Government AMS-STD-595 20090?
The US Government AMS-STD-595 20090 is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
How do I get a Certificate of Conformance (CofC) for the US Government AMS-STD-595 20090?
Contact MyPerfectColor support if you need a certificate of conformance for US Government AMS-STD-595 20090. We are happy to provide this with your order.
Does this US Government AMS-STD-595 20090 meet my spec?
The US Government AMS-STD-595 20090 is the color portion of the spec. The remaining part of the spec will indicate the type of paint needed. Paint can be purchased directly from the color page, but MyPerfectColor offers many additional paint types not visible from the color page. Please contact us if you are not sure what you need, you don't see what you are looking for, or you need a quote to proceed. MyPerfectColor can furnish Certificates of Conformance upon request.
Color details
RGB 101, 79, 65
HEX: #654F41
LRV: 8.73%
Color properties
Color Type:
Standard
Hide:
Standard
Match Source:
Brochure/swatch book
Match Type:
Physical match
Textured:
No
Source on hand:
Yes
Color Category:
Standard
