70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore 1135 Onyx White is a light, warm off-white with a soft creamy undertone and low chroma. It reads close to white, but not clean or cool; the yellow-beige cast is visible and gives the color a muted, slightly shaded character rather than a sharp white appearance.
MyPerfectColor custom spray paint matched to the selected brand color can be used on HVAC vents, switch plates, outlet covers, speaker grilles, picture frames, shelf brackets, baskets, hardware, and PVC trim pieces where a light coordinated finish is needed. It also suits small exterior parts such as railings, shutters, mailboxes, and fixtures when you want the color carried across a sprayable component rather than repainting a large surface.
Because this is a very light color, coverage over darker, stained, or uneven substrates may take extra coats to build an even result. Finish and substrate can change how warm it reads, and surface texture or sheen differences may make the color appear a little deeper or a little flatter. Careful prep and consistent film build help the match read more evenly on metal, plastic, wood, or previously coated parts.
Similar colors:
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore 1135 Onyx White.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Confirm 1135 Onyx White from a physical Benjamin Moore swatch, fan deck, chip, or an existing painted sample rather than from a screen image. MyPerfectColor makes a custom match to the selected brand color reference, so the most reliable step is to verify the target color before you place the order.
If the part you are painting has to line up with an existing surface, check the reference under the same lighting and from the actual item you want to match. That reduces the chance of ordering a match of the wrong Benjamin Moore color.
Primer may be needed for 1135 Onyx White depending on the substrate, surface condition, and the paint format you choose. A primer is often helpful on bare metal, glossy surfaces, repaired areas, and other tricky substrates where adhesion or uniform coverage can be affected.
For a light color like 1135 Onyx White, primer can also help reduce show-through from darker or uneven surfaces. A primer does not hurt and can improve adhesion, but it is not always required, so check the prep guidance for the specific MyPerfectColor product you plan to order.
The SDS is tied to the MyPerfectColor product and chemistry, not to the Benjamin Moore color name alone. If you are ordering 1135 Onyx White, review the Safety Data Sheet for the specific MyPerfectColor format you plan to use.
MyPerfectColor Safety Data Sheets can be found on the MyPerfectColor Safety Data Sheets page. Use that page to confirm the SDS for the exact product you ordered or plan to order.
For 1135 Onyx White, apply MyPerfectColor spray paint in light, even coats rather than one heavy pass. Hold the can at a steady distance, overlap passes consistently, and keep the motion moving so you do not load too much paint into one area.
That matters on parts like trim pieces, vents, speaker grilles, hardware, PVC pipe, fixtures, and other small items where runs or uneven film build are easy to see. Heavy coats can cause drips, uneven sheen, or a muddy looking build, while thinner coats usually give you better control over the final match.
Finish changes how 1135 Onyx White reflects light, so the same color can look different depending on the sheen you choose. A glossier finish usually reads brighter and more reflective, while a flatter finish can look softer and show less reflection from the surface.
That is a practical coating issue, not just a style choice. If you are coating metal, plastic, wood, or an older painted part, expect the finish and substrate to affect how the matched color reads on the finished item.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore 1135 Onyx White enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore 1135 Onyx White in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.