70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore 1100 Sundial reads as a light, warm yellow with a muted golden cast. It is brighter than beige or tan, but softer than a sharp primary yellow, so the color tends to feel sunlit rather than harsh.
MyPerfectColor custom spray paint matched to the selected brand color can be useful on small parts and details such as vents, switch covers, speaker grilles, brackets, shelving supports, frames, hardware, mailbox parts, and painted accessories. For projects that need a coordinated finish on metal, plastic, wood, or previously coated surfaces, spray application is practical for removable parts and other surfaces that are easier to refinish outside the installed area.
Because this is a light color, the substrate can influence the first coats more than it would with a darker shade. Dark plastic, uneven old paint, or bare metal may show through until enough film builds up, so light, even passes and proper surface preparation can matter. Finish also changes the read of the color: flatter finishes tend to soften the yellow, while glossier finishes can make the golden undertone appear more direct.
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore 1100 Sundial.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
No. The same Benjamin Moore 1100 Sundial color reference can read differently once the finish changes, because matte, satin, and gloss reflect light in different ways. A glossier finish usually makes the color look deeper and more reflective, while a flatter finish reduces reflection and can make surface flaws less obvious.
If you are matching a part that will sit next to an existing painted surface, choose the finish that best matches the item you are coating, not just the color code. That is the safest way to order a match of Benjamin Moore 1100 Sundial that looks right after application.
Coverage depends on the size of the part, the surface texture, how much hide is needed, how you apply the paint, and how many coats are required. For spray paint, a typical can covers about 20 square feet with one coat.
If you are coating rough, porous, dark, or uneven surfaces in Benjamin Moore 1100 Sundial, plan on using more material than the basic estimate. For a small item like a vent cover, bracket, or hardware piece, one can may be enough; larger projects or multi-coat jobs usually need extra coverage.
Choose the finish based on how the item will be used and how much reflection you want. A flatter finish hides surface imperfections better and reduces glare, while a glossier finish is usually easier to wipe clean and can hold up better on higher-wear parts.
Keep in mind that gloss level also changes how Benjamin Moore 1100 Sundial reads on the finished item. If you are coating trim pieces, fixtures, covers, or removable parts, match the finish to the original surface whenever possible so the final result is more consistent.
With spray paint matched to Benjamin Moore 1100 Sundial, dry-to-touch time is usually only a matter of minutes. Recoating is typically best after 1 to 2 hours, and full cure is about 2 weeks.
Those are different milestones, so do not confuse dry-to-touch with fully ready for handling or installation. If the part will be stacked, mounted, or put back into service, allow enough time for the coating to harden before heavy handling.
Yes, MyPerfectColor spray paint matched to Benjamin Moore 1100 Sundial can be used on many plastics, but plastics vary a lot and some are harder to coat than others. Because of that, testing on the actual material is important before painting the full item.
For better adhesion, use the MyPerfectColor primer for Acrylic Enamel on difficult plastic surfaces. Clean the part well, make sure it is fully dry, and confirm the paint sticks properly on a small test area before finishing the whole piece.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore 1100 Sundial enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore 1100 Sundial in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.