Match of Pratt and Lambert™ 320A Green Alabaster *

MyPerfectColor custom spray paint matched to Pratt and Lambert 320A Green Alabaster is typically dry to the touch within minutes. Plan to recoat in about 1 to 2 hours, then allow about two weeks for full cure.

Dry to touch, recoat, and fully cured are different stages. If the part needs to be stacked, assembled, or handled a lot, wait for full cure whenever possible.

Finish changes how light reflects from the coated item, so the same MyPerfectColor match of Pratt and Lambert 320A Green Alabaster can read differently depending on sheen. A lower sheen usually looks less reflective, while a higher sheen reflects more light and can make the color appear a bit different on the finished part.

For ordering, treat finish as a practical coating choice, not just an appearance preference. If you are matching an existing painted part, try to keep sheen consistent because sheen differences can be as noticeable as color differences.

Yes. MyPerfectColor custom spray paint matched to Pratt and Lambert 320A Green Alabaster is useful for small parts such as switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar items where a smooth sprayed finish is practical.

This is a good format when the part can be removed, masked, or sprayed evenly. Make sure the surface is cleaned and prepped for the material you are coating so the match and the finish both perform well.

Primer needs depend on the substrate, the surface condition, and the paint format you choose for Pratt and Lambert 320A Green Alabaster. A primer never hurts and can improve adhesion, but it is not always required.

Primer is especially worth considering on bare, slick, patched, or difficult surfaces. Follow the prep guidance for the selected MyPerfectColor product and, when in doubt, use a test area before coating the full part.

Coverage depends on surface size, texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat, so small parts often use less than a full can while rough or dark surfaces may need more.

If you are coating multiple pieces, count all of the parts, sides, and overspray losses before ordering. If you choose a different MyPerfectColor format besides spray paint, coverage is usually much higher, often in the 400 to 600 square foot range depending on the product.

MyPerfectColor has an original sample of the Pratt and Lambert 320A Green Alabaster in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

MyPerfectColor offers custom spray paint matched to Pratt and Lambert 320A Green Alabaster which enables you to conveniently achieve a professional spray-smooth finish. It is difficult to gauge spray paint coverage because it depends on how you apply it and the amount of overspray, but generally the 11oz spray will cover about 20 square feet per coat.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. This paint sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

While MyPerfectColor can provide paint matched to the Pratt and Lambert 320A Green Alabaster, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.