Match of Behr™ PPU15-16 Simple Blue *

Use light, even coats and keep the spray moving so you do not load too much paint in one pass. Hold a consistent distance, overlap each pass slightly, and avoid stopping in one spot. Heavy coats can cause runs, slower dry time, and a finish that looks uneven once the paint cures.

If the part needs more coverage, build it with several thin coats instead of one heavy coat. Follow the drying and recoating directions for the specific MyPerfectColor product you order, because dry time can change with temperature, humidity, film thickness, and the substrate.

Primer depends on the surface, its condition, and the paint type you are using. A primer can improve adhesion and help create a more uniform base on bare, porous, glossy, damaged, or hard-to-stick surfaces. On some sound, previously coated surfaces, primer may not be required.

The safest approach is to check the prep guidance for the specific MyPerfectColor product you plan to order. In general, primer does not hurt and can only help adhesion, but it is not always necessary for every project.

The SDS is tied to the MyPerfectColor product and chemistry, not to the brand color name alone. For MyPerfectColor Safety Data Sheets, use this page: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm

If you are reviewing safety information for a specific format, make sure you are looking at the SDS for the exact MyPerfectColor product you intend to order.

The finish you choose affects durability, cleanup, reflectivity, and how the matched color reads on the finished item. Lower-sheen finishes usually reduce glare and hide surface texture better, while higher-sheen finishes reflect more light and are often easier to wipe clean.

Choose the sheen based on how the part will be used and what level of wear it will see. If the item will sit next to an existing painted surface, remember that sheen can change the apparent color even when the color match itself is correct.

Yes, but plastics vary a lot, so test the actual material before committing to the full part. Clean the surface well, and use the prep steps recommended for the specific plastic if the item is slick or hard to bond to. A primer can improve adhesion and is often a good choice on difficult plastics.

MyPerfectColor spray paint sticks well to most plastics, but the best result comes from using the right prep for the specific item. If the part is important or unfamiliar, do a small test area first to confirm adhesion and appearance.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr PPU15-16 Simple Blue enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr PPU15-16 Simple Blue in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr PPU15-16 Simple Blue in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.