Match of Duron™ 5290W Nada *

Yes, MyPerfectColor custom-matched paint for 5290W Nada can be used on metal and on some previously coated surfaces, but the result depends on surface condition and prep. Clean off dirt, grease, wax, and other contamination first. If the old coating is glossy or slick, scuff it so the new coating can bond. If you see rust, peeling paint, or loose material, remove or repair it before painting.

The final appearance can still vary because the condition of the old coating, its gloss, and its texture can affect how a match of 5290W Nada reads after application. If the part will sit next to an existing painted area, that risk is higher. A test spray on a small hidden area is the safest way to confirm adhesion and appearance before finishing the full item.

Finish changes how 5290W Nada reflects light, so the same color match can look different in different sheens. A lower sheen usually looks less reflective, while a higher sheen reflects more light and can make the color read differently on the item you paint.

If you are matching an existing coated part, try to match the finish as closely as possible, not just the color code. The color reference tells MyPerfectColor what to match, but the final appearance also depends on sheen, substrate, and surface texture. If those factors do not match, the painted item may look different even when the color formula is correct.

For MyPerfectColor custom spray paint matched to 5290W Nada, dry time and recoat timing should be treated as separate steps. Spray paint is typically dry to touch within minutes, should usually be recoated in 1 to 2 hours, and is fully cured in about two weeks.

Do not assume the surface is ready for heavy handling just because it feels dry. Light handling may be possible earlier, but full cure takes longer. If you apply heavier coats, cool the part, or paint in less favorable conditions, expect longer wait times before recoating or putting the item back in service.

Coverage for 5290W Nada depends on the size of the item, the texture of the surface, how much hiding is needed, the application method, and how many coats you plan to apply. For spray paint, a typical can covers about 20 square feet with one coat. For other paint formats, coverage is often about 400 to 600 square feet, depending on the product and application.

If you are painting a rough, porous, dark, or uneven surface, plan on using more material than a smooth, light, single-color surface. If you need two coats for color evenness or hide, build that into your order. When in doubt, it is safer to allow extra paint than to stop short in the middle of the job.

The SDS is tied to the actual MyPerfectColor product and chemistry, not the 5290W Nada color name alone. To get the right document, look up the SDS for the specific MyPerfectColor product format you are ordering, such as spray paint or another match of 5290W Nada.

If you need the Safety Data Sheet, check the MyPerfectColor Safety Data Sheets page after selecting the product. That is the safest way to make sure you are reviewing the SDS for the correct formula instead of assuming one SDS covers every format.

MyPerfectColor has an original sample of the Duron 5290W Nada in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

MyPerfectColor offers custom spray paint matched to Duron 5290W Nada which enables you to conveniently achieve a professional spray-smooth finish. It is difficult to gauge spray paint coverage because it depends on how you apply it and the amount of overspray, but generally the 11oz spray will cover about 20 square feet per coat.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. This paint sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

While MyPerfectColor can provide paint matched to the Duron 5290W Nada, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.