Match of Behr™ HDC-NT-06G Glasgow Fog *

Coverage depends on the surface size, texture, how well the surface hides the old color, your application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat, so small parts like vents, hardware, grilles, or pipe sections may need less than a full project area calculation suggests.

If you are painting a larger item or a rough or porous surface, plan for extra material. If the item is dark, uneven, or heavily textured, you may need more than one coat to get even coverage with a match of HDC-NT-06G Glasgow Fog.

Finish changes how reflective the coating is, which changes how HDC-NT-06G Glasgow Fog reads after it is sprayed. A glossier finish usually reflects more light, while a flatter finish reflects less. That means the same color match can look different once it is on the part.

This is a practical coating issue, not just a preference issue. If the item already has an existing sheen or will sit next to another coated surface, the finish choice can affect whether the result looks consistent.

Choose the sheen based on how the item will be used and cleaned, not just on the color name. Higher gloss finishes usually clean more easily and show more reflectivity, while lower gloss finishes reduce shine and can make surface texture less noticeable.

For a match of HDC-NT-06G Glasgow Fog, the right sheen also depends on the surface you are coating. The same color in different sheens can look different on the finished part, so match the sheen to the application when appearance consistency matters.

Before applying MyPerfectColor paint matched to Behr HDC-NT-06G Glasgow Fog, clean the surface thoroughly and remove dust, grease, and other contamination. If the part is metal or already painted, light scuffing can help the new coating adhere more evenly.

Check the existing coating for rust, peeling, or other damage first, because the condition of the old surface can show through the new finish. Gloss, texture, and wear on the base surface can all affect how the match of HDC-NT-06G Glasgow Fog looks after application.

Use light, even coats and keep the can moving so you do not flood one area. Proper distance and overlap help reduce runs, uneven sheen, and heavy color build when applying a match of HDC-NT-06G Glasgow Fog.

Heavy passes can make the finish look muddy or inconsistent, especially on small parts like hardware, grilles, or trim pieces. Multiple thin coats usually give better control than one heavy coat when you are using custom spray paint matched to the selected brand color.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr HDC-NT-06G Glasgow Fog enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr HDC-NT-06G Glasgow Fog in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr HDC-NT-06G Glasgow Fog in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.