70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore 2175-60 Light Salmon is a light, warm salmon with a soft peach-pink base and muted orange undertone. It reads as a low-chroma color rather than a bright coral, with an overall gentle appearance and an LRV that keeps it on the lighter side.
MyPerfectColor custom spray paint matched to the selected brand color reference can be used on small parts and accessories where this softened salmon tone needs to be repeated cleanly. It can work on vents, switch covers, speaker grilles, frames, shelving brackets, mailbox parts, railings, PVC trim pieces, hardware, and furniture accents when spray application is the practical way to coat a part or fixture.
Because this is a relatively light color, dark substrates, filler edges, and uneven prep can show through more readily than they would with deeper shades. The final look can also shift with finish, film build, and surface texture, so sprayed metal, plastic, wood, or previously coated parts may read slightly different even when the color match is correct.
For Benjamin Moore references, MyPerfectColor supplies a custom match of the selected color in its own spray-paint and specialty-format offerings rather than the brand's original paint product.
Similar colors:
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore 2175-60 Light Salmon.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
MyPerfectColor custom spray paint matched to 2175-60 Light Salmon can be used on many plastic parts, but plastics vary a lot. If the item is a low-energy or unfamiliar plastic, test on the actual part first because adhesion can differ by material, surface texture, and prior coating.
For better adhesion, use the MyPerfectColor primer for Acrylic Enamel before spraying the color match. Clean the part well, make sure it is dry, and verify the finish on a small area before coating the full item.
Coverage depends on the surface size, texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat, so a smooth small item may need less while a textured or darker item may need more.
For MyPerfectColor paint matched to 2175-60 Light Salmon, estimate the total surface area you plan to coat and allow extra for second coats, edges, and overspray. If you are painting pipes, vents, fixtures, or hardware, the shape and texture can change real coverage.
The color code 2175-60 Light Salmon identifies the color target, but the finish or sheen is a separate factor. MyPerfectColor custom-matched paint can look lighter, darker, or more reflective after application depending on the finish, the substrate, and the surface texture.
If the item will sit next to an existing painted surface, be aware that gloss level and surface condition can change how the match reads. The safest approach is to choose the finish you need for the part and test the result on the actual material when appearance match is important.
MyPerfectColor spray paint matched to 2175-60 Light Salmon is typically dry to the touch within minutes. It should usually be recoated in one to two hours, but that is not the same as being fully cured.
Plan on about two weeks for full cure before heavy handling or service use. If you need to stack, install, or reassemble the item, wait until the coating has enough hardness for the task.
Before applying a MyPerfectColor match of 2175-60 Light Salmon over metal or an existing coating, clean the surface, remove grease and dirt, and scuff glossy areas so the new coating can bond properly. If there is rust, loose paint, or contamination, deal with that first because those conditions can affect adhesion and appearance.
The condition of the old coating, including its gloss and texture, can change how the new color reads after it is applied. If the existing finish is uncertain, test a small area first so you can confirm adhesion and visual compatibility before coating the full item.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore 2175-60 Light Salmon enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore 2175-60 Light Salmon in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.