Match of Sherwin Williams™ QC16 Agreeable Gray *

The Safety Data Sheet is tied to the specific MyPerfectColor product, not to the QC16 Agreeable Gray color name by itself. If you are ordering a MyPerfectColor match of QC16 Agreeable Gray, use the SDS for the exact paint or spray product you plan to buy.

If you switch formats, such as spray paint versus another paint type, check that the SDS matches that exact MyPerfectColor chemistry.

For QC16 Agreeable Gray custom spray paint, apply light, even coats and keep the can moving so the surface does not get flooded. Use a consistent spray distance, overlap each pass slightly, and avoid heavy passes that can create runs or a muddy build.

Let each coat dry or flash as directed before adding the next one. That matters most on small parts, vents, grilles, hardware, and other pieces where buildup shows quickly.

Choose the finish for QC16 Agreeable Gray based on how the item will be used and cleaned. Lower sheen usually hides more surface variation, while higher sheen is often easier to wipe clean.

The same color can look different as gloss changes, so the finish affects more than appearance. It can also change how much texture or substrate show-through you notice on the finished part.

QC16 Agreeable Gray custom spray paint is practical for trim details, fixtures, railings, vents, pipes, hardware, accessories, and other small parts that are awkward to brush. It is also useful for removable components that need to coordinate with a known paint color.

If the item is narrow, detailed, or hard to reach, spray format often gives a more efficient application than brushing. That is especially helpful on parts like switch covers, grilles, brackets, mailboxes, or shutters.

Whether QC16 Agreeable Gray needs primer depends on the substrate, the surface condition, and the product type you order. Primer is often worth using on bare, slick, glossy, porous, or damaged surfaces, and a primer never hurts because it can improve adhesion.

If the item is already well coated and in good condition, primer may not be necessary. Check the prep guidance for the specific MyPerfectColor product before you start.

MyPerfectColor has an original sample of the Sherwin Williams QC16 Agreeable Gray in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams QC16 Agreeable Gray. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams QC16 Agreeable Gray, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.