Match of Sherwin Williams™ NW17 Divine White *

Yes, but plastics vary a lot, so the safe approach is to test the actual material first. A match of Sherwin Williams NW17 Divine White is a color reference, and MyPerfectColor can make a custom spray paint matched to that color, but adhesion depends on the specific plastic, its finish, and how it was prepared.

For best results, clean the part well, scuff it if possible, and use the MyPerfectColor primer for acrylic enamel when the surface is difficult or very smooth. A small test piece or hidden spot is the best way to confirm adhesion before you paint the full item.

Clean the metal first so grease, dust, and contamination do not interfere with the finish. If the surface has rust, loose paint, peeling areas, or chalky residue, remove those defects before applying MyPerfectColor paint matched to NW17 Divine White.

If you are painting over a sound existing coating, a light scuff can help the new coating grip. Keep in mind that the condition of the old finish, plus its gloss and texture, can change how NW17 Divine White looks after it is sprayed.

Choose the sheen based on how the part will be used and how closely you need the finished item to resemble the target surface. A lower sheen reduces reflectivity, while a higher sheen is usually easier to wipe clean and can feel more durable on handled items.

The sheen you order also changes how NW17 Divine White reads after application. The same color can look lighter or darker depending on gloss level, so match the finish to the application instead of treating sheen as just a style choice.

For spray paint matched to NW17 Divine White, expect it to be dry to the touch within minutes. A recoat is typically safe in about 1 to 2 hours, depending on film build, temperature, and airflow.

Do not assume it is fully cured just because it feels dry. Full handling strength can take about two weeks, so be careful with stacking, assembly, or hard use until the coating has had time to cure.

A typical can of MyPerfectColor spray paint covers about 20 square feet with one coat, but actual coverage depends on surface texture, color hiding, application method, and how many coats you need. Rough, porous, or dark surfaces usually need more paint than smooth, light ones.

If you are coating a mailbox, vent cover, trim piece, or similar item in NW17 Divine White, plan for extra material if the part has edges, curves, or detailed areas that are hard to spray evenly. When the project is larger than a small accessory, estimate coverage by the total surface area and build in margin for a second coat.

MyPerfectColor has an original sample of the Sherwin Williams NW17 Divine White in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams NW17 Divine White. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams NW17 Divine White, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.