Match of Sherwin Williams™ NW09 Extra White *

Coverage for NW09 Extra White depends on the size of the item, surface texture, how well the old finish hides, the application method, and how many coats you need. As a general guide, a typical can of spray paint covers about 20 square feet with one coat, while other MyPerfectColor paints typically cover about 400 to 600 square feet.

If you are painting detailed parts like vents, switch covers, or hardware, plan for extra material if the surface is rough, dark, or likely to need more than one coat. Measuring the actual parts you will paint is the safest way to avoid ordering too little.

The Safety Data Sheet is tied to the MyPerfectColor paint product and chemistry, not to the NW09 Extra White color name by itself. If you need the SDS, use the MyPerfectColor Safety Data Sheets page for the specific product you are ordering.

That matters because the SDS can vary by product format, so make sure you are looking at the sheet for the exact MyPerfectColor item, not just the brand color reference.

A match of Sherwin Williams NW09 Extra White can be ordered as MyPerfectColor spray paint for many plastic parts, but plastics vary widely. For that reason, test the actual part first if the surface is unfamiliar or important to the project.

MyPerfectColor spray paint generally sticks well to most plastics, and using the MyPerfectColor primer can improve adhesion on challenging or low-energy surfaces. Clean and prepare the part carefully before painting so you can judge how the finish behaves on the real substrate.

Yes. MyPerfectColor custom spray paint matched to NW09 Extra White is often used for small parts where a smooth sprayed finish is more practical than brushing, such as switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar items.

For these projects, the key decision is not the color name alone but whether spray application fits the part, the surface prep is appropriate, and the item can be coated evenly. If the part is removable, it is usually easier to paint it off the installed surface.

MyPerfectColor spray paint matched to NW09 Extra White is typically dry to the touch within minutes. If you need another coat, the usual recoat window is about 1 to 2 hours.

Dry to the touch is not the same as fully cured. Allow about two weeks for full cure before treating the finish as fully hardened or installing the part in a way that could mark the surface.

MyPerfectColor has an original sample of the Sherwin Williams NW09 Extra White in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams NW09 Extra White. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams NW09 Extra White, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.