Match of Sherwin Williams™ HGSW4051 White Core *

Yes. MyPerfectColor can make a custom spray paint match of HGSW4051 White Core for small parts and awkward items that are easier to coat by spray than by brush, such as vents, trim details, railings, pipes, hardware, and accessories.

This is useful when you want the item itself to match the selected brand color reference. It is MyPerfectColor paint matched to HGSW4051 White Core, not Sherwin Williams original paint.

Plastics vary a lot, so test HGSW4051 White Core on the actual material before committing to the full part. MyPerfectColor spray paint adheres well to most plastics, but slick, flexible, or unusual plastics can behave differently.

For better adhesion, use the MyPerfectColor primer for Acrylic Enamel and do a test spray on a hidden area or scrap piece first. That is the safest way to confirm how the color and finish will look on your specific substrate.

Before applying HGSW4051 White Core, clean the surface to remove dust, grease, and other contamination. On metal, address rust first. On an existing coating, scuff any glossy areas so the new paint has a better surface to grip.

The condition of the old coating matters. Gloss, texture, wear, and aging can all change how a match of HGSW4051 White Core looks once applied, especially if you are coating only part of an item beside an older finish.

The color code HGSW4051 White Core identifies the color target, but the finish is a separate ordering choice that changes how the coating reflects light. A higher gloss will usually read differently than a flatter finish, even when the color formula is the same.

If you are matching an existing part, keep in mind that sheen, texture, and substrate can all affect the final appearance. The best way to reduce surprises is to match the finish and application conditions as closely as possible to the item you are coating.

For HGSW4051 White Core spray paint, dry-to-touch happens within minutes, recoating is typically done in one to two hours, and full cure takes about two weeks. Those are different milestones, so a coat can feel dry before it is ready for final handling.

If the part needs to be installed, stacked, packaged, or put back into service, wait for the coating to cure before subjecting it to heavy handling. That helps avoid marking or damaging the finish while it is still hardening.

MyPerfectColor has an original sample of the Sherwin Williams HGSW4051 White Core in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams HGSW4051 White Core. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams HGSW4051 White Core, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.