Match of Sherwin Williams™ HGSW4016 Midsummer White *

Coverage depends on the size of the item, the texture of the surface, the hiding power of the coating, the application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat, while other paint formats usually cover about 400 to 600 square feet.

For small parts like vents, grilles, brackets, trim pieces, or fixtures, measure the total area and plan extra material if the surface is rough, porous, or a darker color underneath. If the part will need more than one coat to reach even coverage, include that in your order.

Yes, but plastics vary widely, so test on the actual material first. MyPerfectColor spray paint sticks well to most plastics, but the surface and plastic type can change adhesion results.

If you are painting items like covers, trim pieces, housings, or other molded parts, use MyPerfectColor primer to improve adhesion when needed. Clean the part well before painting, and do not assume every plastic will behave the same way just because it looks similar.

The SDS is tied to the actual MyPerfectColor product or chemistry you order, not to the color name alone. If you are buying a match of Sherwin Williams HGSW4016 Midsummer White, look up the SDS for the specific MyPerfectColor paint format you selected.

MyPerfectColor Safety Data Sheets are available on the Safety Data Sheets page. If you are comparing formats such as spray paint or another coating type, check the SDS for the exact product you plan to use.

Choose sheen based on how the part will be used and how much surface detail it has. Lower sheen finishes usually reflect less light and can hide texture better, while higher sheen finishes are typically easier to clean and may be more durable, but they can also make surface flaws more noticeable.

For a match of Sherwin Williams HGSW4016 Midsummer White, remember that sheen changes how the color looks on the finished item. If the part will be handled often or needs frequent cleaning, that may point you toward a different finish than a decorative or low-wear part.

Clean the surface first, remove dirt, grease, and contamination, and make sure any rust is addressed before painting. If the old coating is glossy or smooth, scuff it so the new paint has better mechanical grip.

For a match of Sherwin Williams HGSW4016 Midsummer White, the condition of the existing coating can affect the final look as much as the color itself. Gloss, texture, and edge wear can all change how the finished part reads, so a sound, clean substrate is important before you spray.

MyPerfectColor has an original sample of the Sherwin Williams HGSW4016 Midsummer White in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams HGSW4016 Midsummer White. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams HGSW4016 Midsummer White, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.