Match of Sherwin Williams™ HGSW3351 Naval *

MyPerfectColor HGSW3351 Naval spray paint is typically dry to the touch within minutes, but dry-to-touch is not the same as ready for recoating or full handling.

Plan on recoating in about 1 to 2 hours, and allow about 2 weeks for full cure before subjecting the part to heavier handling or service. If the item is a small fixture, cover, or removable part, let each coat set before adding the next one so the finish can build evenly.

Yes, but plastic substrates vary a lot, so a test on the actual material is the safest way to confirm adhesion and appearance for HGSW3351 Naval.

MyPerfectColor spray paint sticks well to most plastics, but prep and primer can matter on low-energy or hard-to-coat plastics. Using the MyPerfectColor primer can improve adhesion before applying a match of HGSW3351 Naval.

For metal or a previously painted surface, clean off dirt, grease, and other contamination first, then scuff the surface so the new coating has something to grip. If there is rust, loose paint, or failing coating, remove or stabilize it before spraying HGSW3351 Naval.

Be aware that the condition of the old finish can affect the result. Gloss, texture, and wear in the existing coating can all change how a match of HGSW3351 Naval reads on the finished part, even when the color match itself is correct.

The SDS is tied to the specific MyPerfectColor product and chemistry, not the HGSW3351 Naval color name by itself. If you are ordering a spray can or another format, check the Safety Data Sheet for that exact product.

For MyPerfectColor products, Safety Data Sheets are listed on the Safety Data Sheets page. Use that source to confirm the correct document before you order or use the paint.

Confirm HGSW3351 Naval from a physical swatch or a known existing color reference whenever possible. Screen colors can shift with display settings and lighting, so on-screen viewing alone is not the best ordering check.

MyPerfectColor matches to the original brand color standard for HGSW3351 Naval, so the key decision is whether HGSW3351 Naval is the target color you want matched. Verify the reference first, then place the order in the format you need.

MyPerfectColor has an original sample of the Sherwin Williams HGSW3351 Naval in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams HGSW3351 Naval. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams HGSW3351 Naval, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.