Match of Sherwin Williams™ HGSW1391 Delft Pottery *

For HGSW1391 Delft Pottery, use light, even coats instead of one heavy pass. Keep the can moving, hold a consistent distance from the part, and overlap each pass slightly so the color build stays even.

Heavy spray can cause runs, uneven sheen, or a muddy-looking build. If you are coating vents, hardware, trim pieces, or other small parts, let each coat flash off before applying the next one so the finish levels more cleanly.

Custom-made MyPerfectColor paint matched to HGSW1391 Delft Pottery should be ordered carefully because these matches are made to order and are not returnable or refundable.

Before you buy, confirm the brand color reference, the product format you need, the sheen, and the quantity. That matters most when the paint will be used on a visible part or beside an existing painted surface.

Coverage for HGSW1391 Delft Pottery depends on the size of the item, the surface texture, the hiding power of the coating, the application method, and how many coats you need.

As a planning guide, a typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paints typically cover about 400 to 600 square feet, but rough, dark, porous, or highly detailed surfaces may need more product.

MyPerfectColor spray paint sticks well to most plastics, but plastics vary widely, so it is smart to test HGSW1391 Delft Pottery on the actual part first. Clean the surface well before spraying.

If the plastic is difficult or low-energy, use the MyPerfectColor primer to improve adhesion. A test on the real material is the safest way to confirm the result before you coat the full item.

For metal or an existing coating, start by cleaning off dirt, grease, and other contamination before applying HGSW1391 Delft Pottery. If the old finish is glossy and sound, scuffing it first can help the new coating bond better.

Check for rust, peeling paint, or other failure in the old layer and remove anything loose before you spray. The gloss, texture, and condition of the existing surface can affect how the color reads, so test a small area when the final appearance matters.

MyPerfectColor has an original sample of the Sherwin Williams HGSW1391 Delft Pottery in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams HGSW1391 Delft Pottery. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams HGSW1391 Delft Pottery, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.