Match of Sherwin Williams™ HGSW1235 Frolic *

For HGSW1235 Frolic in MyPerfectColor custom spray paint, treat dry-to-touch, recoat, and full cure as different stages. Dry-to-touch is usually within minutes, recoating is typically in 1-2 hours, and full cure is about 2 weeks.

If the part needs to be assembled, installed, or stacked before then, handle it carefully because the coating can still mark or print while it is not fully cured.

Confirm HGSW1235 Frolic from a physical swatch or a known existing color reference from the original brand, not from screen viewing alone. Monitors and phone displays can shift the color enough to cause an ordering mistake.

MyPerfectColor makes a match of HGSW1235 Frolic to the original brand color standard, so it is important to verify that this is the exact target color before you place the order.

Yes, HGSW1235 Frolic can be used on many plastic parts, but plastics vary a lot, so test on the actual material first. Surface type, flexibility, and mold-release residue can all affect adhesion and appearance.

MyPerfectColor spray paint sticks well to most plastics, and using the MyPerfectColor primer can improve adhesion on difficult pieces. If the part is important or hard to replace, test a small area before painting the full item.

Before spraying HGSW1235 Frolic, clean the metal or existing coating so dust, grease, chalk, and other contamination do not interfere with adhesion. If there is rust, loose paint, or failing coating, remove it before painting.

For sound glossy surfaces, scuff sanding helps the new coating grip. Also keep in mind that the condition of the old coating, along with its gloss and texture, can change how the finished HGSW1235 Frolic match looks after application.

Yes. The finish changes reflectivity, and that changes how HGSW1235 Frolic is perceived on the finished item. The color code identifies the color target, but it does not by itself define sheen.

A glossier finish can make the surface look brighter and show more texture, while a flatter finish reflects less light and can read differently even when the color match is correct. Choose the finish that fits the part and the level of visual consistency you need.

MyPerfectColor has an original sample of the Sherwin Williams HGSW1235 Frolic in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams HGSW1235 Frolic. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams HGSW1235 Frolic, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.