Match of Sherwin Williams™ HGSW1011 Flirty Fuschsia *

Choose the finish based on how the part will be used and how much reflectivity you want. The same match of HGSW1011 Flirty Fuschsia can look different in different sheen levels because gloss changes how light reflects off the surface. Higher gloss is usually easier to clean and more reflective, while lower gloss is less reflective and can look less shiny on the finished item.

If the color has to line up with an existing painted item, the finish matters as much as the color match. A test spray on the actual substrate is the safest way to confirm that the finish and the matched color both work for the project.

Yes, MyPerfectColor spray paint matched to HGSW1011 Flirty Fuschsia can be used on many plastic parts, but plastics vary a lot. Some plastics accept coating well, while others need better prep or a primer to help adhesion.

For the best chance of success, test the paint on the actual plastic first and use the MyPerfectColor primer for acrylic enamel when adhesion is a concern. That is especially important on slick or low-energy plastics, where surface prep can make a big difference.

MyPerfectColor spray paint matched to HGSW1011 Flirty Fuschsia is typically dry to the touch within minutes. It should usually be recoated in about 1 to 2 hours, but dry-to-touch is not the same as fully cured.

For handling, stacking, or putting the part into normal service, allow about 2 weeks for full cure. If the item has to be assembled or used quickly, plan the project so the coating has enough time to reach that final cured state.

Confirm HGSW1011 Flirty Fuschsia from a physical swatch or a known existing color reference from the original brand, not from a screen image alone. MyPerfectColor matches the original brand color standard, so the target color should be verified before you place the order.

If you are matching a part that is already painted, compare it to a physical reference under the lighting where the finished item will be used. That is the best way to reduce the risk of ordering the wrong match of HGSW1011 Flirty Fuschsia.

For metal, clean the surface first so dirt, oil, and contamination do not interfere with adhesion. Remove loose rust or failing coating, then scuff any sound glossy surface so the new coating can bond more reliably.

With a match of HGSW1011 Flirty Fuschsia, the condition of the existing surface can change the final result as much as the color itself. Gloss, texture, and the state of the old coating can all affect how the finished item looks, so a proper prep step is important before spraying.

MyPerfectColor has an original sample of the Sherwin Williams HGSW1011 Flirty Fuschsia in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams HGSW1011 Flirty Fuschsia. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams HGSW1011 Flirty Fuschsia, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.