70% of Orders Ship within 3 Business Days.
Match of Kelly Moore™ KM5266-3 Artemis *
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
Ready to purchase? Select your options in the 4 steps below.
A match of Kelly Moore KM5266-3 Artemis is a warm, medium-light tan with a clear golden undertone and moderate saturation. It reads earthy rather than gray, with enough depth to hold color on small parts without looking overly bright.
MyPerfectColor custom spray paint matched to the selected brand color can be used on PVC trim pieces, vent covers, switch plates, shelving brackets, mailbox hardware, picture frames, railings, shutters, and other sprayable fixtures. It is also a practical choice for furniture accents, metal accessories, and mixed-material parts where a repeatable tan-gold reference needs to be carried across different surfaces.
Because this color sits in a mid-range value, it usually covers more evenly than very light or highly vivid colors, but substrate color and surface condition still matter. Dark, uneven, or porous surfaces may show through until enough film builds up, and the final appearance can shift with finish and texture. A smoother sheen will tend to make the warm undertone read a little cleaner, while rougher surfaces can mute it slightly.
Similar colors:
Product Data
About Kelly Moore Paints
Since 1946, Kelly-Moore Paints has provided quality, innovative products, and exceptional service at a fair value. Kelly-Moore’s more than 1,700 new colors present endless color combinations.
Matching Kelly Moore Paint Colors
MyPerfectColor uses its expert capabilities to recreate the original Kelly Moore color by matching the original Kelly Moore color books and swatches.
The colors shown on this website are computer video simulations of the Kelly Moore Color and may not match Kelly Moore Color standards. Refer to Kelly Moore Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Kelly Moore color. If you intend to touch up paint that has been on your walls for years, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Frequently Asked Questions About Match of Kelly Moore™ KM5266-3 Artemis *
How should I confirm the right match for KM5266-3 Artemis by Kelly Moore before ordering from MyPerfectColor?
Confirm KM5266-3 Artemis from a physical swatch or a known existing painted reference from the original Kelly Moore color standard, not from a screen alone. MyPerfectColor makes a custom match to the selected brand color reference, so the key ordering step is verifying that KM5266-3 Artemis is the target color you want before you buy.
If you are trying to coordinate with an older painted item, remember that aging, sheen, and surface wear can change how the existing surface looks. In that case, a direct match to the original Kelly Moore reference may not look identical to the aged part even when the color formula is correct.
What finish should I choose for KM5266-3 Artemis by Kelly Moore in MyPerfectColor paint?
The best finish for KM5266-3 Artemis depends on how the item will be used and how much durability or cleanup you need. Higher-gloss finishes are usually easier to wipe clean and can be more durable on handled parts, while lower-gloss finishes reduce reflectivity and can make surface flaws less noticeable.
Keep in mind that sheen changes how the matched color reads on the finished item. A match of KM5266-3 Artemis in gloss will not look the same as the same color in satin or matte, so if you are coordinating with an existing piece, try to match the original sheen as closely as possible.
How much KM5266-3 Artemis by Kelly Moore do I need for my project?
Quantity depends on the size of the item, how textured the surface is, how well the coating hides, your application method, and how many coats you need. As a planning rule, a typical can of spray paint covers about 20 square feet with one coat, while other paints typically cover between 400 and 600 square feet.
For KM5266-3 Artemis, plan extra material if you are painting a rough, porous, or high-contrast surface, or if the job needs more than one coat for even coverage. Measuring the actual surface and allowing for a test coat is the safest way to avoid running short.
How long does KM5266-3 Artemis by Kelly Moore take to dry and recoat in spray paint?
With spray paint matched to KM5266-3 Artemis, the coating is usually dry to the touch within minutes. It should typically be recoated in 1 to 2 hours, and full cure usually takes about two weeks.
Dry to the touch, ready for another coat, and fully cured are different milestones. If the part will be handled, assembled, or installed, it is best to wait for full cure when possible so the finish is less likely to mark or shift during use.
Do I need primer before applying KM5266-3 Artemis by Kelly Moore?
Primer needs depend on the substrate, its condition, and the type of paint you are using. For KM5266-3 Artemis, the safest approach is to check the prep guidance for the selected MyPerfectColor product and surface type before you start.
As a general rule, primer never hurts and can improve adhesion, but it is not always required. Bare, damaged, glossy, or difficult surfaces are the situations where primer is more likely to help before applying a match of KM5266-3 Artemis.
How quickly will I receive my paint matched to Kelly Moore KM5266-3 Artemis?
What are the RGB, HEX and LRV values for Kelly Moore KM5266-3 Artemis?
What paint type is used to make spray paint matched to Kelly Moore KM5266-3 Artemis? And how many spray cans do I need?
MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Kelly Moore KM5266-3 Artemis enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
What is the Hue Angle and Chroma for Kelly Moore KM5266-3 Artemis?
How can MyPerfectColor match the Kelly Moore KM5266-3 Artemis?
MyPerfectColor has an original sample of the Kelly Moore KM5266-3 Artemis in its color archive. This enables us to make paint and verify that it matches the original.
Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.
Learn more about our color matching service.
Do I need a primer for Kelly Moore KM5266-3 Artemis?
How do I convert Kelly Moore KM5266-3 Artemis to a different company?
While we can provide Kelly Moore KM5266-3 Artemis in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.