Looking for color by Hex, RGB, CMYK, or Lab?

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application


A match of Benjamin Moore OR-90 Tanglewood reads as a warm, muted tan-brown with orange-yellow undertones. It has a medium-deep appearance, so it feels grounded rather than light or airy, and the chroma is restrained enough to stay earthy instead of vivid.

As a MyPerfectColor custom spray paint match, it is well suited to sprayable parts that benefit from a warm brown-neutral finish: metal railings, mailbox hardware, vent covers, switch plates, lamp housings, shelf brackets, chair frames, PVC trim pieces, and cabinet pulls or knobs. It can also be used on speaker grilles, baskets, frames, and accessory parts where a coordinated tan-brown color is needed on a small surface.

Because this color is not highly saturated, it usually applies more quietly than strong accent colors, but the final read still depends on substrate, finish, and film build. Over darker or uneven surfaces, thin coverage can let the underlying color influence the result, and gloss finishes may make the tone look a little deeper and warmer on edges and molded details.

Similar colors:

2164-40 Serengeti Sand
OR-246 Milk Chocolate
1160 Chadwick Brown

Product Data

About Benjamin Moore Paints

Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore OR-90 Tanglewood.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Benjamin Moore™ OR-90 Tanglewood *

Can MyPerfectColor match OR-90 Tanglewood for plastic parts, and should I use primer first?

Yes. MyPerfectColor can make a match of OR-90 Tanglewood for spray-paint projects on many plastic parts, but plastics vary a lot. Testing on the actual item is important because some plastics are hard to coat and may need different prep.

Using the MyPerfectColor primer for acrylic enamel can improve adhesion on difficult plastics. If the part is especially slick or low energy, a test spray on a hidden area is the safest way to confirm how the coating will bond before you paint the full item.

Where do I find the SDS for OR-90 Tanglewood from MyPerfectColor?

The Safety Data Sheet is tied to the MyPerfectColor product you order for OR-90 Tanglewood, not to the color name by itself. That means the SDS depends on the paint chemistry and format you are buying.

Use the MyPerfectColor Safety Data Sheets page to find the SDS for the matching product before use. If you are comparing formats, check the sheet for the exact item you plan to order.

Will the finish change how OR-90 Tanglewood looks after MyPerfectColor applies it?

Yes. Finish and sheen can change how OR-90 Tanglewood appears after application because they affect reflectivity and how much light the coating throws back. The color target stays OR-90 Tanglewood, but the finished look can still shift with sheen.

If the item will sit next to an existing coated surface, try to match the finish as well as the color reference. Different gloss levels can make the same matched color look different on the final part.

What prep is needed before applying OR-90 Tanglewood to metal or an older painted surface?

For metal or an existing coating, clean the surface first so dirt, oil, and contamination do not interfere with adhesion. If the old finish is glossy, scuffing it can help the new coating grab better.

Check for rust, loose paint, or damaged coating before you spray OR-90 Tanglewood. The condition of the base surface can change both adhesion and the final appearance, especially when gloss, texture, or old wear is already present.

How much OR-90 Tanglewood paint should I order for my project?

Coverage depends on the size of the part, the surface texture, how well the coating hides, the spray method, and how many coats you need. For planning, a typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paints typically cover about 400 to 600 square feet, depending on the product and surface.

If you are coating a textured or dark surface, plan for extra material because coverage can drop and more than one coat may be needed. For a best estimate, measure the item and allow for test spraying and full coverage passes.

How quickly will I receive my paint matched to Benjamin Moore OR-90 Tanglewood?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Benjamin Moore OR-90 Tanglewood depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
What are the RGB, HEX and LRV values for Benjamin Moore OR-90 Tanglewood?
The RGB values for Benjamin Moore OR-90 Tanglewood are 177, 139, 115 and the HEX code is #B18B73. The LRV for Benjamin Moore OR-90 Tanglewood is 28.98. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about Light Reflectance Values and using RGB and Hex codes for paint.
What is spray paint matched to Benjamin Moore OR-90 Tanglewood made of? And how much area will one can cover?

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore OR-90 Tanglewood enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

Is Benjamin Moore Paint used to make Benjamin Moore OR-90 Tanglewood?

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

Can I buy Benjamin Moore OR-90 Tanglewood locally?
You would have to ask around locally. MyPerfectColor can make and ship the Benjamin Moore OR-90 Tanglewood in a variety of paint types, but we are not able to comment on what other suppliers can provide. MyPerfectColor is not just working off a formula in a database - we compare every batch against the original color to verify the color accuracy. MyPerfectColor has extensive color matching capabilities and more than ten times the number of pigments available to a typical paint store.
How do I convert Benjamin Moore OR-90 Tanglewood to a different color from another paint company?

While we can provide Benjamin Moore OR-90 Tanglewood in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.