70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore OR-393 Glacier Bay is a very light, low-chroma blue-gray with a soft cool cast and a slight green bias. It reads quiet and restrained rather than bright, with enough color to keep the surface from looking flatly neutral.
MyPerfectColor custom spray paint matched to the selected Benjamin Moore color can be used on small parts where that pale, subdued look needs to carry across different materials. It is a practical choice for HVAC vents, speaker grilles, switch covers, access panels, PVC trim, shelf brackets, railings, mailboxes, frames, baskets, and hardware. It also works for furniture accents and removable accessories that need to coordinate with an existing painted surface without drawing extra attention.
Because this is a light color, darker or uneven substrates may show through more readily, so prep and film build matter. On smooth or glossier finishes, the subtle cool undertone and any surface texture can become more noticeable, while a flatter finish will usually read softer. As with any custom match, the final appearance can shift with substrate, sheen, and spray technique.
MyPerfectColor supplies a match of the selected Benjamin Moore color in custom spray paint and other specialty formats for non-housepaint projects. If the part will sit beside an older coated surface, small differences in aging, texture, or sheen can affect how closely the colors appear to align.
Similar colors:
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore OR-393 Glacier Bay.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Yes. A match of Benjamin Moore OR-393 Glacier Bay can be ordered as MyPerfectColor custom spray paint matched to the selected Benjamin Moore color reference for small parts and removable items such as switch covers, vents, speaker grilles, brackets, knobs, and trim pieces.
For the best result, make sure the item can be fully cleaned and masked as needed, then spray in light coats. If the part is plastic or another difficult substrate, test the actual item first because adhesion can vary by material.
Yes. The color reference for OR-393 Glacier Bay stays the same, but the finish can change how the coating reads on the finished part because gloss level changes reflectivity.
If you are matching a nearby coated item, use the finish that best fits the project and expect the same color to look a little different in matte, satin, or glossier coatings once it is applied.
For MyPerfectColor custom spray paint matched to OR-393 Glacier Bay, a typical can covers about 20 square feet with one coat.
Actual coverage depends on the size of the part, surface texture, how much hiding is needed, application method, and the number of coats. Rough, porous, or dark surfaces usually need more paint than a smooth, light, fully prepared surface.
Yes, but plastics vary widely, so test OR-393 Glacier Bay on the actual plastic item before painting the full part. MyPerfectColor spray paint sticks well to most plastics, but some low-energy or very smooth plastics can need extra prep.
Clean the surface carefully and remove mold release, oils, and silicone contamination before painting. Using the MyPerfectColor primer for Acrylic Enamel can improve adhesion on difficult plastic substrates.
The SDS is tied to the MyPerfectColor product and chemistry, not the Benjamin Moore color name alone. For OR-393 Glacier Bay, check the SDS for the specific MyPerfectColor format you are ordering.
If you are comparing spray paint with another MyPerfectColor product format, review the SDS for that exact product because the safety information can differ by chemistry.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore OR-393 Glacier Bay enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore OR-393 Glacier Bay in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.