70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore OR-132 Calgary Cream is a light, warm cream-beige with a soft yellow undertone and low chroma. It reads as muted rather than bright, with a gentle, slightly powdery character that sits closer to cream than to a true white.
MyPerfectColor custom spray paint matched to the selected brand color can be used on small architectural and accessory parts where a warm cream tone is needed, such as vents, switch plates, speaker grilles, railings, mailbox hardware, bracketry, picture frames, shelf supports, and PVC trim pieces. It also works for coordinating metal, plastic, wood, or previously coated components when a consistent cream-beige finish is needed after proper preparation.
Because this is a light color with modest chroma, darker or uneven substrates may show through more easily and can benefit from primer and additional coats for even coverage. The final appearance can also shift with sheen and surface texture; smoother finishes usually make it read a little cleaner, while rougher surfaces can make it look slightly warmer and deeper.
Similar colors:
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore OR-132 Calgary Cream.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Yes, it can work on many plastics, but plastics are not all the same, so testing on the actual part is important before you commit to the full project. A match of OR-132 Calgary Cream may spray well on items like PVC pipe, vents, speaker grilles, switch covers, or other molded parts, but surface energy, texture, and old coatings can change adhesion.
For the best chance of success, clean the part well, let it dry, and use the MyPerfectColor primer for acrylic enamel to improve adhesion. If the plastic is unfamiliar, glossy, or flexible, spray a test area first and confirm both adhesion and appearance before painting the finished piece.
MyPerfectColor custom spray paint matched to OR-132 Calgary Cream is typically dry to the touch within minutes, but that is not the same as being ready for recoating or handling. Plan to recoat in about 1 to 2 hours, and allow about 2 weeks for full cure.
If you are painting hardware, grilles, trim pieces, or removable parts that will be installed soon after painting, do not rely on dry to the touch alone. Wait for the film to build and cure enough for the actual use the part will see, especially if the item will be handled, mounted, or stacked before the paint fully cures.
A typical can of MyPerfectColor custom spray paint matched to OR-132 Calgary Cream covers about 20 square feet with one coat, but real coverage depends on the surface, texture, hiding power, spray technique, and how many coats you need.
For small parts like vents, brackets, knobs, pipe sections, or fixtures, one can may be enough for several items if the surfaces are smooth and the color change is modest. For rough, porous, or dark surfaces, or when you need multiple coats for even color, plan extra paint rather than ordering too little.
Yes. The same match of OR-132 Calgary Cream can read differently in matte versus gloss because the finish changes how light reflects off the surface and how deep or crisp the color appears.
If the item you are painting sits beside an existing coated part, try to match the finish as closely as possible so the color and sheen work together. This matters on parts like access panels, railings, fixtures, and trim pieces where the coated surface will be seen under normal light and close range.
Before applying a match of OR-132 Calgary Cream to metal, clean off dust, grease, and loose contamination, then remove rust and scuff glossy areas so the coating can bond properly. The condition of the existing surface matters as much as the color match.
If you are coating an existing painted part, the old finish should be sound and firmly attached. Gloss, texture, and surface damage can all affect the final look, so items like railings, brackets, mailboxes, shutters, and hardware should be prepared carefully before you spray.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore OR-132 Calgary Cream enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore OR-132 Calgary Cream in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.