Match of Behr™ WR14-1 Flurries *

MyPerfectColor custom spray paint matched to Behr WR14-1 Flurries is useful when you need that color on small or awkward parts that are easier to spray than brush, such as trim details, fixtures, railings, vents, pipes, hardware, and accessories.

It is also a practical choice for removable parts or repeatable components where you want a match of WR14-1 Flurries across metal, plastic, wood, wicker, or previously coated items after proper prep.

For MyPerfectColor spray paint matched to Behr WR14-1 Flurries, dry-to-touch, recoat, and full cure are different stages. In typical use, the coating is dry to touch within minutes, should be recoated in one to two hours, and is fully cured in about two weeks.

If the part needs to be handled, assembled, or put back in service, allow extra time beyond dry-to-touch so the film can continue to harden.

Custom-made color matches are not returnable or refundable, so it is important to confirm Behr WR14-1 Flurries, the MyPerfectColor product type, the sheen, and the quantity before ordering.

If the item will be painted in a visible location or beside an existing surface, double-check the reference you want matched before you place the order. The correct brand color code helps make sure you get the intended match of WR14-1 Flurries.

The best sheen for a match of Behr WR14-1 Flurries depends on how the part will be used and how you want the finished item to behave in light. Lower sheen finishes usually hide surface texture and minor prep marks better, while higher sheen finishes reflect more light and can make the same color read differently on the finished part.

Choose the sheen based on durability needs, cleaning needs, and the look of the object you are coating. The color code alone does not define sheen, so WR14-1 Flurries must be ordered in the finish that fits the project.

A typical can of MyPerfectColor spray paint covers about 20 square feet with one coat, but actual coverage for WR14-1 Flurries depends on the size and texture of the surface, the hiding power needed, the application method, and how many coats you use.

If the item has a rough texture, sharp edges, or strong color contrast underneath, plan for extra material. For larger projects, calculate coverage per coat before ordering so you do not run short of the match of WR14-1 Flurries.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr WR14-1 Flurries enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr WR14-1 Flurries in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr WR14-1 Flurries in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.