Match of Behr™ T12-14 Livingstone *

Lighting can make a match of Behr T12-14 Livingstone read lighter, darker, warmer, or cooler once it is on the part. Natural daylight, warm indoor bulbs, cool LEDs, and shadowed locations can all change how the finished coating appears even when the color match itself is correct.

If the item will be viewed in a specific place, judge the color in that environment whenever possible. Placement next to other painted surfaces, nearby textures, and the chosen sheen can also affect the final appearance of MyPerfectColor custom paint matched to Behr T12-14 Livingstone.

The best finish depends on how the part will be used. Lower sheen finishes usually reduce reflectivity and can hide surface imperfections better, while higher sheen finishes are easier to wipe clean and may be more durable in some applications. The same Behr T12-14 Livingstone match will also look different as sheen changes.

If the item is a trim piece, fixture, hardware piece, or another handled surface, choose the sheen based on cleaning needs, wear, and the look you want on the finished object. If you are matching an existing part, try to stay close to the sheen of the surrounding surface so the match reads consistently.

Primer depends on the substrate, its condition, and the paint format you order. A primer is not always required, but it usually helps with adhesion and can improve results, especially on difficult, uneven, porous, or previously coated surfaces.

For a Behr T12-14 Livingstone match, the safest approach is to follow the prep guidance for the specific MyPerfectColor product you are using. If the surface is slick, damaged, or a problem material, a primer is often the better choice before applying the topcoat.

Coverage depends on surface size, texture, porosity, application method, and how many coats are needed for even color. Spray paint typically covers about 20 square feet per coat, while other paint formats often cover about 400 to 600 square feet per coat.

For a Behr T12-14 Livingstone project, measure the actual paintable area and plan for extra material if the surface is rough, dark, uneven, or likely to need more than one coat. If the part is small but detailed, order enough to allow for test spraying and touch-up of edges or cut lines.

With spray paint, dry-to-touch, recoat, and full cure are different stages. Spray coatings are usually dry to touch within minutes, can often be recoated in one to two hours, and are generally fully cured in about two weeks.

For a Behr T12-14 Livingstone match, handle the part carefully between coats and avoid heavy use until the coating has had time to cure. If the part will be assembled, mounted, or installed soon after painting, plan the schedule so the finish is not stressed before it has hardened fully.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr T12-14 Livingstone enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr T12-14 Livingstone in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr T12-14 Livingstone in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.