Match of Behr™ S390-6 Cliffside Park *

Use light, even coats and keep the spray pattern moving so the film builds gradually. Hold the can at a consistent distance, overlap each pass slightly, and avoid stopping in one spot, since heavy passes can create runs, texture differences, or a darker-looking area on Behr S390-6 Cliffside Park.

If the part is small, curved, or detailed, plan for multiple thin coats instead of one wet coat. Let each coat flash off before the next pass, and follow the product instructions for recoating and full dry time.

The SDS is tied to the MyPerfectColor product and chemistry, not to the Behr S390-6 Cliffside Park color name by itself. You can find MyPerfectColor Safety Data Sheets here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm.

If you need the SDS for a specific format, such as spray paint, make sure you are looking at the SDS for the exact MyPerfectColor product you plan to order.

Choose the sheen based on how the item will be used and how much reflectivity you want. Lower sheens usually reduce glare and can hide small surface flaws better, while higher sheens are easier to wipe clean but will reflect more light and make the Behr S390-6 Cliffside Park match look brighter or deeper depending on the surface.

Because gloss level changes how color reads, the same matched color can look different in flat, satin, or gloss. If you are coating trim, hardware, vents, or other parts that will be handled often, pick the sheen that fits the wear level and the finish you want on the finished object.

Clean the surface first so oil, dust, wax, and loose contamination do not interfere with adhesion. On bare metal, remove rust and treat any corrosion before painting. On an existing coating, scuff the surface so the new finish has mechanical grip, then clean off sanding residue before spraying Behr S390-6 Cliffside Park.

The condition of the old coating matters as much as the color match. If the old finish is glossy, uneven, peeling, or textured, the new coating can look different even when the color is correct, so test the prep on a small area before coating the full part.

Not always. Once MyPerfectColor match of Behr S390-6 Cliffside Park is applied, lighting, viewing angle, sheen, and nearby surfaces can change how the color reads. The same match may appear slightly different on a wall, a small fixture, or a curved part than it does on a sample or in another room.

If the item will sit next to an existing painted surface, expect the surrounding finish and age of the neighboring area to affect the final appearance. For the best result, evaluate the finished part in the same lighting where it will be used.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr S390-6 Cliffside Park enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr S390-6 Cliffside Park in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr S390-6 Cliffside Park in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.