Match of Behr™ N320-3 Tanglewood *

Choose the finish based on how the item will be used and cleaned, not just on the color. A lower sheen usually reflects less light and can be a better fit when you want the match of Behr N320-3 Tanglewood to read more quietly on the finished part. A higher sheen is usually easier to wipe down and can handle more frequent cleaning, but it will also show more reflection and surface detail.

For a custom-matched project, the same Behr N320-3 Tanglewood color can look different in flat, satin, semi-gloss, or gloss. Pick the sheen that matches the application, then order MyPerfectColor paint matched to the selected brand color in that finish.

Start with a clean surface. Remove dust, grease, wax, and loose coating before applying a match of Behr N320-3 Tanglewood. If the surface is smooth or glossy, light scuffing can help the coating bond better when that step is appropriate for the substrate.

Mask off nearby areas you do not want painted, and test the match on the actual surface before doing the full job. That matters with Behr N320-3 Tanglewood because substrate condition, texture, and existing coating can change how the finished color appears and how well it performs.

Confirm Behr N320-3 Tanglewood from a physical swatch, a labeled fan deck, or another known brand reference rather than from a phone or monitor. Screen viewing can shift the color, which can lead to ordering the wrong match.

MyPerfectColor makes a custom match to the selected Behr color reference, not to a screen image. If you are comparing to an existing painted item, decide whether you want the original Behr N320-3 Tanglewood standard or the look of the aged surface as it currently appears.

For spray paint matched to Behr N320-3 Tanglewood, dry-to-touch is usually within minutes. Recoat timing is typically about 1 to 2 hours, and full cure is about two weeks.

Do not treat dry-to-touch and fully cured as the same thing. If the part will be assembled, stacked, or handled heavily, wait until the coating has had enough time to harden before putting it into service.

Once a match of Behr N320-3 Tanglewood is applied, lighting, sheen, placement, and nearby surfaces can change how the color reads. The same coating can look a little different under warm light, cool light, daylight, or indoor jobsite lighting.

Texture and gloss also matter. A smoother, shinier surface can reflect more light and make Behr N320-3 Tanglewood appear different than it did on the reference swatch, so judge the finished part in the actual location where it will be used.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr N320-3 Tanglewood enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr N320-3 Tanglewood in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr N320-3 Tanglewood in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.