Match of Behr™ N200-7 Underground *

Before you apply a MyPerfectColor custom spray paint matched to Behr N200-7 Underground, clean the surface, remove grease or residue, and let it dry fully. Light scuffing can help where appropriate, especially on slick or previously coated parts, and masking should be used to protect areas that should not be painted.

For best decision-making, test the color on the actual surface first if the item is high-visibility or if you are painting beside an existing finish. That helps you confirm adhesion, coverage, and how the matched color reads on the real substrate before you commit to the full project.

No. The same Behr N200-7 Underground color reference can look different in matte, satin, semi-gloss, or gloss because the finish changes light reflection and perceived depth. MyPerfectColor can match the color target, but the final appearance still depends on the sheen you choose.

If you are matching a part that sits next to an existing surface, select the finish with care because finish differences can be as noticeable as color differences. The reference code does not by itself define sheen, so the finish is a separate ordering decision.

Coverage depends on the size of the item, surface texture, application method, and how many coats are needed. A typical can of spray paint covers about 20 square feet with one coat, while other paints typically cover between 400 and 600 square feet.

For Behr N200-7 Underground, plan extra material if the surface is textured, porous, or a difficult substrate, or if you expect more than one coat for even hiding. If you are unsure, it is safer to estimate conservatively than to run short midway through the job.

Yes. A custom spray paint match of Behr N200-7 Underground is often used on switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar small parts where a smooth sprayed finish is practical.

This is a good fit when the part can be removed, cleaned, and masked properly before spraying. For best results, prepare the item carefully and confirm the finish and color on the actual piece before painting a larger visible area.

Plastics vary widely, so Behr N200-7 Underground matched in MyPerfectColor spray paint may need different prep or primer depending on the exact material. Testing on the actual plastic is important because some plastics are harder to coat than others.

MyPerfectColor spray paint sticks well to most plastics, but using the MyPerfectColor primer for acrylic enamel can improve adhesion on challenging surfaces. If the part is a low-energy plastic or has an unknown finish, a test application is the safest way to confirm performance before you paint the full item.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr N200-7 Underground enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr N200-7 Underground in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr N200-7 Underground in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.