Match of Behr™ M570-3 On Location *

The SDS is tied to the MyPerfectColor paint product and its chemistry, not to the Behr M570-3 On Location color name alone. You can find MyPerfectColor Safety Data Sheets on the Safety Data Sheets page here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm.

If you need the SDS before ordering, use that page to verify the document for the product format you plan to buy.

Coverage depends on the surface size, texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other paint formats typically cover about 400 to 600 square feet, but the actual yield can vary.

For Behr M570-3 On Location, measure the item or area, then allow extra for texture, edges, and any second coat you expect to need. If the substrate is rough, porous, or a difficult color change, plan conservatively so you do not run short.

For Behr M570-3 On Location, apply light, even coats rather than one heavy coat. Keep the can or spray gun at a consistent distance, overlap passes slightly, and move at a steady pace so the film builds evenly.

Heavy passes can cause runs, uneven sheen, and muddy color build. If you are coating a small part, extra light coats usually give better control than trying to cover everything at once.

Before applying Behr M570-3 On Location to metal or a previously painted surface, clean off dirt, oil, wax, and other contamination. If the surface is glossy, scuff it so the new coating has better mechanical grip. Remove rust or failing coating before you paint.

The condition of the old surface matters because gloss, texture, and wear can change how the finished color looks. If the existing coating is peeling, soft, or uneven, address that first so the new match has a more reliable base.

Choose the sheen based on the item's use and the finish you need, not just the color name. Sheen affects durability, reflectivity, cleanup, and how the matched color reads on the finished surface. The same Behr M570-3 On Location match can look different in a flat, satin, or gloss finish.

If the part will be installed near an existing painted surface, remember that sheen differences can make the color appear different even when the color match itself is correct. Pick the finish that best fits the application and the surface condition you are covering.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr M570-3 On Location enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr M570-3 On Location in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr M570-3 On Location in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.