Match of Behr™ P190-2 Fahrenheit *

Coverage depends on the size of the item, the surface texture, the hiding power you need, the spray method, and how many coats you plan to apply. As a practical rule, a typical can of spray paint covers about 20 square feet with one coat. If you are ordering another MyPerfectColor format for a larger project, coverage is often about 400 to 600 square feet per gallon, but the actual result still depends on the surface and application.

For P190-2 Fahrenheit, plan for extra material if the substrate is rough, porous, or dark, since those conditions can reduce coverage and may require additional coats.

The SDS is tied to the MyPerfectColor product or chemistry, not to the Behr color name alone. For P190-2 Fahrenheit, check the SDS for the exact MyPerfectColor product you plan to order. You can find MyPerfectColor Safety Data Sheets here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm.

If you are comparing formats, make sure you open the SDS for the specific MyPerfectColor product you will use.

Primer needs depend on the substrate, its condition, and the paint type you are using. A primer never hurts and can improve adhesion, but it is not always required. If you are painting bare, repaired, glossy, or difficult surfaces, primer is often worth considering before a match of P190-2 Fahrenheit.

Check the prep guidance for the specific MyPerfectColor product you are ordering, because the best prep can vary by surface and application.

Choose sheen based on how the part will be used and how much durability or cleanup you need. Lower sheen finishes usually reduce reflectivity and can be more forgiving on uneven surfaces. Higher sheen finishes are more reflective, often clean more easily, and can make the color read differently on the finished item.

Because P190-2 Fahrenheit is a color match, the same color can look slightly different in matte, satin, semi-gloss, or gloss. Pick the finish that fits the item and the wear it will see.

For spray paint, dry-to-touch is usually within minutes, recoating is typically recommended in 1 to 2 hours, and full curing takes about 2 weeks. Dry-to-touch, recoat time, and full cure are different stages, so do not treat them as the same thing.

For a match of P190-2 Fahrenheit, avoid heavy handling until the coating has had time to build and cure according to the product instructions.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr P190-2 Fahrenheit enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr P190-2 Fahrenheit in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr P190-2 Fahrenheit in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.