70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore CW-40 Tavern Gray is a muted warm gray with a taupe cast. It sits in a medium-deep range, so it reads as a grounded neutral rather than a crisp gray, with visible brown and yellow undertones that keep it on the warmer side.
MyPerfectColor custom spray paint matched to CW-40 Tavern Gray is a practical choice for vents, switch covers, speaker grilles, railings, mailboxes, shutters, PVC trim pieces, brackets, shelf supports, cabinet hardware, and small frames where a warm neutral needs to carry across metal, plastic, wood, or previously coated parts. It is also a good fit for removable fixtures and accessories that need to coordinate to a known brand color without brushing marks.
Because this color is moderately deep and fairly low in chroma, it usually covers more cleanly than very light or highly saturated colors, but the surface underneath can still affect the final read. Strong substrate color, uneven repairs, and heavy texture may show through more than they would in a lighter neutral, while smoother finishes can make the warm taupe note read a little clearer. As with any custom spray project, film build, prep, and finish choice can change how light or dark the color appears in use.
Similar colors:
HC-101 Hampshire Gray
CSP-135 worn leather shoes
worn leather shoes CSP-135
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore CW-40 Tavern Gray.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
For MyPerfectColor CW-40 Tavern Gray, start with a clean, dry surface. Remove dirt, grease, wax, and loose coating before you spray. If the item has a smooth existing finish, light scuffing can help the new coating grab better, but only do this when the surface can handle it.
Mask off nearby areas you do not want coated, and test the color on the actual item before painting the full piece. That is especially important when CW-40 Tavern Gray will be applied to metal, plastic, trim parts, or anything with texture or wear that could change how the match reads.
Yes, MyPerfectColor CW-40 Tavern Gray can be used on many plastic parts, but plastics vary a lot. Some accept coating well and others need extra prep or primer, so test on the actual plastic before committing to the full job.
MyPerfectColor spray paint can stick well to most plastics, and using the MyPerfectColor primer can improve adhesion on difficult surfaces. If you are painting a vent cover, switch plate, grille, bracket, or similar plastic part, surface prep and a test spray are the safest way to reduce failure risk.
Before ordering MyPerfectColor CW-40 Tavern Gray, confirm the brand color reference, the MyPerfectColor product format, the sheen, and the quantity you need. A match of Benjamin Moore CW-40 Tavern Gray is a color reference, not the product line itself, so the finish and format still matter when you place the order.
Custom-matched orders are not returnable or refundable, so it is worth double-checking the selected color name and code before checkout. This is especially important if the paint will be used on a visible part, a repeat order, or a project where the color must coordinate with existing pieces.
The Safety Data Sheet is tied to the MyPerfectColor product chemistry, not to CW-40 Tavern Gray by itself. That means you should look up the SDS for the exact MyPerfectColor paint format you plan to order.
MyPerfectColor Safety Data Sheets are available on the Safety Data Sheets page. Use that page to review the correct product information for the coating you are buying, rather than relying on the color name alone.
For MyPerfectColor CW-40 Tavern Gray spray paint, dry to touch happens within minutes, but that does not mean the coating is fully ready for use. Plan on recoating in one to two hours if needed.
For handling, give the paint much more time than the first dry-to-touch stage. Full cure takes about two weeks, so avoid heavy use, abrasion, or tight assembly until the coating has had time to harden fully.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore CW-40 Tavern Gray enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore CW-40 Tavern Gray in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.