70% of Orders Ship within 3 Business Days.
Match of US Government™ Fed Std 595C 20090 *
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
Ready to purchase? Select your options in the 4 steps below.
A match of US Government Fed Std 595C 20090 is a dark, muted brown with a warm cast. It reads earthy rather than clean or gray, with low chroma and a noticeable red-yellow influence that keeps it from looking flat black or cool brown.
MyPerfectColor custom-matched paint to the selected Fed Standard 595C reference is useful when a drawing, maintenance note, or procurement callout specifies this code. The code identifies the color target; it does not define coating chemistry, gloss, preparation, or approval status.
For spray work, this color can be used on equipment panels, brackets, housings, enclosures, cabinet frames, carts, support rails, pipe covers, and fabricated metal parts. It can also fit smaller spray-painted items such as vent covers, switch plates, speaker grilles, hinges, handles, and other hardware when a consistent brown reference is needed across different substrates.
Because 20090 is a deeper, muted color, finish, primer shade, and film build can change how warm or dark it appears after application. It usually hides substrate color better than a light tone, but sheen differences, surface texture, and repairs beside older coatings can still be noticeable. If you are matching an in-service part, the standard reference may not read exactly like a weathered or sun-changed coating.
Similar colors:
Product Data
Perfect Color Ventures LLC DUNS Number and CAGE Code
MyPerfectColor DUNS Number: 117438928
MyPerfectColor CAGE Code: 8SUA4
MyPerfectColor is compliant with section 889. Download the Record of Section 889 Representations PERFECT COLOR VENTURES LLC.
About US Government Federal Standard (now Aerospace Material Specification / AMS) 595 Colors. Fed-Std-595C / FED STD 595 Colors
The Federal Standard (now Aerospace Material Specification / AMS) 595 colors are used to specify colors for US Government applications. The color are used by the US Government agencies, branches and suppliers. The most common requests we receive for Fed Standard Colors are for spray paint, Direct to Metal and other paints for prototyping, marking and identification and touchup applications. Typical clients include the USCG, all branches of the Armed Services, the State Department, Lockheed Martin and Boeing. For example, we provided paint to the Navy for marking shells with the specific Fed Std color designated to identify the type of round.
We offer 5 standard sheens in our lacquer touchup paint: flat, low lustre, satin, semi-gloss or gloss. We also offer a full range of Alkyd and Acrylic Direct To Metal paints. Please contact us if you have any questions. Please submit RFQs to [email protected]
The colors in the Federal Standard set have no official names and are identified by five-digits. The numbers designate the sheen, color classification and color intensity.
The first digit will be 1,2 or 3 and indicates the level of sheen:
1 = gloss
2 = semi gloss
3 = matt
The second digit indicates the color group;
0 = Brown 5 = Blue
1 = Red 6 = Grey
2 = Orange 7 = Other (white, black, violet, metallic)
3 = Yellow 8 = Fluorescent
4 = Green
The third to fifth digits indicate the intensity. Lower numbers indicates a darker color and higher numbers indicate a lighter color.
While the Fed Std colors indicate sheen as part of the 5 digits, MyPerfectColor still requires you to enter a specific sheen. For example, the color Fed Std 37038 technically refers to a matte finish, but MyPerfectColor offers it in any sheen.
Frequently Asked Questions About Match of US Government™ Fed Std 595C 20090 *
Does Fed Std 595C 20090 define the full coating system, or just the color target?
A match of US Government Fed Std 595C 20090 is a color reference target, not a complete coating specification. It tells you which color to match, but it does not by itself choose the product chemistry, gloss level, surface preparation, corrosion protection, or any required approval process.
For ordering, treat this as MyPerfectColor paint matched to the selected Fed Standard 595C reference. If the job also requires a specific coating system or formal acceptance, that needs to be checked separately from the color code.
Will Fed Std 595C 20090 match an older painted part exactly for touch-up?
Not always. Even when Fed Std 595C 20090 is the correct color code, an older in-service coating can have faded, changed sheen, changed texture, or been affected by weathering, chemicals, or wear. Those differences can make a touch-up look different next to the surrounding finish.
If the repair is visible or acceptance-critical, it may be better to compare against the existing part or use a sample panel before committing to the order. MyPerfectColor can match the standard reference, but an aged finish may still read differently on the repaired area.
How do I reorder Fed Std 595C 20090 to keep multiple parts consistent?
To improve consistency, reorder by the exact color code, Fed Std 595C 20090, and keep the same product type and finish for every part in the project. If you change the format, substrate, surface prep, or application method, the final appearance can shift even when the color code is correct.
For repeat work, save the original order details and note the product format used. That gives you the best chance of getting the same result on future parts, panels, or touch-up work.
Is Fed Std 595C 20090 enough to choose the right paint for interior, exterior, or chemical exposure?
No. Fed Std 595C 20090 tells you the color target, but it does not tell you whether the paint is right for interior use, exterior exposure, abrasion, chemical contact, or a particular substrate. Those requirements depend on the project, not on the color code.
Choose the product based on service environment and performance needs, then match the color to Fed Std 595C 20090. MyPerfectColor offers custom-matched paint to the selected government color reference, but the coating type still has to fit the job.
What should I know about dry time and recoating for Fed Std 595C 20090?
Dry-to-touch time, recoat timing, handling, and full cure are determined by the specific paint product, not by Fed Std 595C 20090 itself. The color code only identifies the reference color, so you should follow the product instructions for the exact format you order.
If your project has a tight schedule, check the product data before ordering so you can plan between coats, masking, and handling correctly. Do not assume the same timing across all product types just because the color match is the same.
When will I receive my paint matching US Government Fed Std 595C 20090? Can I get it right away?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match US Government Fed Std 595C 20090 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
What are the LRV, HEX, and RGB values for the US Government Fed Std 595C 20090?
The RGB values for US Government Fed Std 595C 20090 are 101, 79, 65 and the HEX code is #654F41. The LRV for US Government Fed Std 595C 20090 is 8.73. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors and Light Reflectance Values.
What paint type is used to make spray paint matched to US Government Fed Std 595C 20090? And how many spray cans do I need?
MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to US Government Fed Std 595C 20090 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
Does US Government paint color US Government Fed Std 595C 20090 need primer?
MyPerfectColor doesn't sell US Government paint, but it does match the US Government Fed Std 595C 20090 and all the other US Government colors in a wide variety of paint types. The need for primer depends on the specific paint and the substrate being painted. The top quality paints these days tend to be self-priming over most surfaces, while paint at the mid to lower grade quality levels will need a separate primer. Most special situations such as bleeding type woods or difficult to adhere surfaces like plastic will often need a specialty primer. Contact MyPerfectColor support if you have specific questions about the best paint to use for your project and whether you need a primer.
How do I buy paint in the US Government Fed Std 595C 20090?
Many types of paint are available for US Government Fed Std 595C 20090 with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to US Government Fed Std 595C 20090?
The US Government Fed Std 595C 20090 is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
How do I get a Certificate of Conformance (CofC) for the US Government Fed Std 595C 20090?
Contact MyPerfectColor support if you need a certificate of conformance for US Government Fed Std 595C 20090. We are happy to provide this with your order.
Does this US Government Fed Std 595C 20090 meet my spec?
The US Government Fed Std 595C 20090 is the color portion of the spec. The remaining part of the spec will indicate the type of paint needed. Paint can be purchased directly from the color page, but MyPerfectColor offers many additional paint types not visible from the color page. Please contact us if you are not sure what you need, you don't see what you are looking for, or you need a quote to proceed. MyPerfectColor can furnish Certificates of Conformance upon request.
Color details
RGB 101, 79, 65
HEX: #654F41
LRV: 8.73%
Color properties
Color Type:
Standard
Hide:
Standard
Match Source:
Brochure/swatch book
Match Type:
Physical match
Textured:
No
Source on hand:
Yes
Color Category:
Standard
