70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore CSP-165 downtown reads as a muted warm taupe-beige with an earthy, slightly yellow-green undertone. Its low chroma keeps it from looking bright or clean, and the mid-depth LRV gives it a noticeable but restrained presence on coated parts and small surfaces.
MyPerfectColor custom spray paint matched to the selected Benjamin Moore color reference can be used on vents, switch plates, speaker grilles, shelf brackets, railings, mailbox parts, PVC trim pieces, hardware, and fixture covers where a quiet warm neutral is needed. It also suits baskets, frames, and small furniture details when the goal is to carry the same subdued color across different materials without calling attention to the part itself.
Because this color is fairly muted, it usually has steadier hide than a vivid accent color, but coverage can still vary with substrate color, texture, and sheen. On smooth metal or plastic, the warm undertone may read a little clearer; on porous or rough surfaces it can appear slightly deeper and more matte. Even film build and good surface prep matter if the part needs to sit near an existing painted surface or if the finish must stay consistent across multiple pieces.
Similar colors:
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore CSP-165 downtown.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
No. A match of Benjamin Moore CSP-165 downtown is the same color reference, but the finish can change how the match reads after application. Matte finishes scatter more light and usually look softer, while glossier finishes reflect more light and can make the color appear deeper or a little different on the finished item.
If you need the coating to match an existing surface closely, choose the sheen carefully because finish differences can be enough to notice even when the color formula is correct.
Choose the sheen for how the part will be used, cleaned, and viewed. A flatter finish usually reduces reflectivity and can be a better choice when you want the color to read less glossy, while higher sheen levels are easier to wipe down and may hold up better on parts that are handled often.
For CSP-165 downtown, remember that sheen changes the way the matched color looks on the final item. If you are coating trim pieces, fixtures, hardware, or other removable parts, pick the finish that fits the surface conditions and the amount of cleaning or wear the item will see.
Before applying a match of CSP-165 downtown, clean the metal or old coating thoroughly so dirt, oil, wax, and loose material do not interfere with adhesion. If the surface is slick, lightly scuff it so the new coating has a better mechanical bond.
Check for rust, corrosion, peeling paint, or contamination and remove or stabilize those areas before spraying. The condition of the old coating, plus its gloss and texture, can affect how the finished color looks even when the formula is correct. If the existing surface is unknown or poorly bonded, test a small area first.
Coverage depends on the surface size, texture, hiding power, application method, and how many coats you need. If you are ordering CSP-165 downtown in spray paint, a typical can covers about 20 square feet with one coat. Other MyPerfectColor paint formats generally cover about 400 to 600 square feet, but actual coverage can vary a lot by surface and application.
For small parts, fixtures, or accessories, it is usually better to estimate by the number of pieces and their surface area, then add extra for test spraying, edge loss, and a second coat if needed.
Custom-made color orders should be checked carefully before you buy, because a match of CSP-165 downtown is made specifically for your order and is not returnable or refundable. Confirm the brand color reference, the MyPerfectColor product type, the sheen, and the quantity before placing the order.
This matters even more for a Benjamin Moore color like CSP-165 downtown, since the finished result can change with substrate, prep, and finish. Make sure the order details match the project you are trying to cover before you submit it.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore CSP-165 downtown enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore CSP-165 downtown in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.