70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore 2090-10 Grand Canyon Red is a deep, warm red with a brown-leaning undertone. Its low LRV gives it a dark, grounded read, while the moderate chroma keeps it from looking dull or washed out.
MyPerfectColor custom spray paint matched to this color can be used on small parts and fixtures where a strong red-brown tone is needed. It is a practical fit for railings, mailboxes, brackets, vent covers, switch plates, speaker grilles, shelving supports, hardware, and other metal, plastic, or wood pieces after proper preparation.
Because this is a dark, fairly saturated color, surface prep and film build matter. Thin coverage can leave lighter substrates or repaired spots showing through, and gloss levels can make texture, scratches, and old coating differences more noticeable. Outdoor parts may also fade or weather at different rates depending on exposure.
Similar colors:
GNE-150 Santiago Brick
COE-151 Santiago Brick
2088-10 Red Oxide
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore 2090-10 Grand Canyon Red.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
For 2090-10 Grand Canyon Red, start by cleaning off dust, grease, wax, and any loose residue. If the surface is sound and smooth, a light scuff can help the coating grab better, but always test on the actual item first. That matters for metal brackets, vents, hardware, pipe covers, and other parts where the substrate can change how the color and finish look.
If you see peeling, rust, chalking, or old coating failure, remove the loose material before you spray. A quick test panel on the same material is the safest way to confirm adhesion and final appearance before you coat the full piece.
The SDS is tied to the MyPerfectColor product chemistry, not to the Benjamin Moore color name alone. For 2090-10 Grand Canyon Red, use the MyPerfectColor Safety Data Sheets page at https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm to find the SDS for the exact product or format you are ordering.
Check the SDS for the specific MyPerfectColor item you plan to use, since different formats can have different safety information.
Coverage for 2090-10 Grand Canyon Red depends on surface size, texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other paints usually cover about 400 to 600 square feet, but real-world coverage can be lower on rough, porous, or dark surfaces.
If you are coating multiple parts, measure each piece and plan extra for edges, cutouts, and test samples. Red colors can also need more careful build to look even, so it is better to order with some margin than to run short mid-project.
Yes, 2090-10 Grand Canyon Red can be used on many plastic parts, but plastics vary widely and some need more prep than others. Clean the surface well, remove mold release or surface contamination, and test adhesion on the actual plastic before coating the full item.
MyPerfectColor spray paint sticks well to most plastics, and the MyPerfectColor primer can improve adhesion on difficult or low-energy surfaces. That is especially useful for PVC, grilles, vents, trim pieces, and molded accessories where the plastic type is not always obvious.
Sheen changes both durability and the way 2090-10 Grand Canyon Red looks after it is sprayed. Lower sheen finishes hide surface flaws better, while higher sheen finishes reflect more light and can make the matched color read differently on the finished part.
Choose the finish based on how the item will be used, how often it will be cleaned, and how much texture you want to show. For Benjamin Moore colors like 2090-10 Grand Canyon Red, MyPerfectColor does not offer interior or exterior house paint product options, so select from the non-housepaint formats that fit the project, such as custom spray paint for trim, hardware, vents, or removable parts.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore 2090-10 Grand Canyon Red enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore 2090-10 Grand Canyon Red in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.