Match of Cabot™ 4TTT Light Cedar *

For 4TTT Light Cedar by Cabot, start with a clean, dry surface. Remove dust, dirt, wax, and grease, then lightly scuff glossy areas if that is appropriate for the material. Mask off areas you do not want coated and make sure loose paint or rust is removed before spraying.

If the surface is unfamiliar or in poor condition, test the MyPerfectColor match on a small area first so you can confirm adhesion and appearance before painting the whole item.

Yes, MyPerfectColor spray paint matched to 4TTT Light Cedar can be used on many plastic parts, but plastics vary a lot. Because of that, test the actual plastic first before coating the full piece.

For better adhesion on difficult plastics or other low-energy surfaces, use the MyPerfectColor primer for Acrylic Enamel before applying the color coat. Good surface prep matters more on plastics than on stable, porous materials.

Confirm 4TTT Light Cedar by Cabot from a physical swatch, a known existing sample, or another trusted original brand color reference before ordering. Do not rely on screen color alone, since displays can shift how the color looks.

MyPerfectColor matches to the selected brand color reference, so the best way to avoid ordering the wrong color is to verify the target against a physical reference from Cabot or an existing item you want matched.

Yes. 4TTT Light Cedar by Cabot can be ordered as MyPerfectColor custom spray paint for small parts and hardware such as vents, switch covers, knobs, brackets, and similar items where a spray finish is practical.

For these projects, remove the part if possible, clean it well, and apply light, even coats. That approach helps the matched color lay down smoothly and makes it easier to reinstall the part after it has dried and cured.

Choose the finish based on how the item will be used, cleaned, and viewed. Sheen changes how 4TTT Light Cedar by Cabot reads on the finished surface, so the same color can look different in flat, satin, or glossier finishes.

If you are matching an existing part, try to select a finish that is close to the surrounding surface. Higher gloss usually reflects more light, shows more surface detail, and can make the color read differently than a flatter finish.

MyPerfectColor has an original sample of the Cabot 4TTT Light Cedar in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

MyPerfectColor offers custom spray paint matched to Cabot 4TTT Light Cedar which enables you to conveniently achieve a professional spray-smooth finish. It is difficult to gauge spray paint coverage because it depends on how you apply it and the amount of overspray, but generally the 11oz spray will cover about 20 square feet per coat.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. This paint sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

While MyPerfectColor can provide paint matched to the Cabot 4TTT Light Cedar, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.