Match of Benjamin Moore™ R-9956 Harbour Breeze *

Choose the sheen based on the part you are coating, not just the color name. A higher sheen is usually easier to clean and more durable, but it will also reflect more light and show surface texture or prep marks more clearly. A lower sheen hides flaws better, but it can be less forgiving in areas that need frequent cleaning.

For Benjamin Moore R-9956 Harbour Breeze, MyPerfectColor supplies a custom match of the selected color in its available specialty formats, not the original Benjamin Moore house paint product. If the item will sit next to an existing coated part, try to match the sheen as closely as possible so the finished piece reads consistently.

Coverage depends on the size of the item, its texture, how porous it is, how much hiding is needed, and how many coats you expect to apply. For spray paint, a typical can covers about 20 square feet with one coat. Rough, textured, or color-changing surfaces usually need more material than a smooth part of the same size.

If you are ordering a match of Benjamin Moore R-9956 Harbour Breeze for a small fixture, trim piece, or removable part, plan conservatively and allow for test spraying and a second coat if needed. This collection is not for interior or exterior house paint options, so the most practical quantity choice is usually based on the specific MyPerfectColor format you plan to use.

It will be a match of the selected color reference, but the finished appearance can still change with lighting, sheen, placement, and nearby surfaces. Daylight, indoor lighting, shade, and reflections can all make R-9956 Harbour Breeze read a little differently after it is applied.

This matters most when the painted part will sit beside an existing surface or in a high-visibility location. If you are deciding whether to order, assume the match is made to the color reference itself, while the installed item can still look different depending on where and how it is viewed.

Yes, but plastics vary a lot, so prep and testing are important. MyPerfectColor spray paint adheres well to many plastics, but smooth or low-energy plastics can be harder to coat reliably than others. Test on the actual item first if the part is important or hard to replace.

For better adhesion, use the MyPerfectColor primer before painting when the plastic is especially slick or difficult. Clean the surface well, let it dry, and make sure the part is free of mold release, oils, and dust before you apply the match of R-9956 Harbour Breeze.

Start by cleaning off grease, dust, rust, and any loose contamination. If the existing coating is glossy and still sound, scuff it so the new coating can grip better. If there is rust, flaking paint, or failing old finish, remove the problem areas before applying the match of R-9956 Harbour Breeze.

Metal condition affects both adhesion and appearance. Texture, rust staining, and an uneven old sheen can show through or change how the color reads, even when the color match itself is correct. If the metal is bare or the surface is questionable, use a suitable primer before applying the MyPerfectColor match.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore R-9956 Harbour Breeze enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore R-9956 Harbour Breeze in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.