Looking for color by Hex, RGB, CMYK, or Lab?

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate


A match of Benjamin Moore GX-236A is a very dark, low-LRV warm red-brown with a muted, earthy character. It reads as a brown-leaning red rather than a bright rust, with enough chroma to show color but not enough to look vivid. The tone is subdued and dense, and sheen changes can shift how much of the red or brown side you notice.

MyPerfectColor custom spray paint matched to GX-236A is suited to smaller parts where a deep warm brown-red is needed: metal railings, brackets, switch plates, speaker grilles, mailboxes, vents, access panels, shelf supports, hardware, and furniture accents. It can also be useful on PVC, trim pieces, or removable accessories when you want a coordinated finish on a shape that is easier to spray than to brush.

Because the color is so dark, surface prep and film build matter. Scratches, sanding marks, patchiness, and sheen changes can be more visible in a color this deep, especially on smooth metal or glossy plastic. On lighter substrates, an even base and full coverage help keep the color reading consistent from edge to edge.

Finish and substrate can also change the apparent depth of GX-236A. Lower-sheen applications usually read flatter and more grounded, while higher gloss can make texture and edge prep more noticeable. A heavier or uneven film may shift the balance between red and brown, so spray technique can affect the final look.

Similar colors:

CC-2 Raphael
R-9901 Raphael
CSP-450 bewitched

Product Data

About Benjamin Moore Paints

Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore GX-236A.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Benjamin Moore™ GX-236A *

Will Benjamin Moore GX-236A look the same in matte and gloss when I order a MyPerfectColor match?

No. The color target stays GX-236A, but the finish can change how the match reads after it is applied. Matte finishes usually reflect less light, while gloss finishes can make the same color look deeper or more intense on the part.

If you are coating vents, brackets, trim pieces, or other removable parts, choose the finish that best fits the item you are painting and keep that finish consistent across all pieces that need to match.

Can MyPerfectColor custom spray paint matched to Benjamin Moore GX-236A be used on plastic parts?

Yes, but plastics vary a lot, so GX-236A should be tested on the actual part before you commit to the full job. MyPerfectColor spray paint sticks well to most plastics, and using the MyPerfectColor primer can improve adhesion on difficult or low-energy surfaces.

This matters for items such as PVC parts, covers, housings, grilles, and other plastic components where you want a match of GX-236A on the object itself, not just a nearby surface.

Where do I find the SDS for MyPerfectColor paint matched to Benjamin Moore GX-236A?

The SDS is tied to the specific MyPerfectColor product and chemistry, not to the Benjamin Moore GX-236A color name by itself. To get the right document, look up the SDS for the exact MyPerfectColor paint format you plan to order.

If you need records for a project, keep the SDS for the product you used with GX-236A so the documentation matches the coating you actually applied.

How much MyPerfectColor spray paint matched to Benjamin Moore GX-236A should I order for my project?

A typical can of spray paint covers about 20 square feet with one coat. For GX-236A, plan your order around the actual surface area, the texture of the substrate, the number of coats you expect to need, and whether you are coating a dark or uneven base.

If you are painting multiple parts such as hardware, fixtures, covers, or small panels, it is safer to round up than to run short before all pieces are finished.

What prep should I do before applying Benjamin Moore GX-236A match paint over metal or an old coating?

Start by cleaning off grease, dust, and contamination, then scuff the surface so the new coating can bond better. Remove rust, loose paint, and any failing coating before applying a match of GX-236A.

On metal, the condition of the old coating, the gloss level, and the surface texture can all affect how GX-236A reads after application. If the part is visible or already painted, a small test spray is the safest way to check the result before coating the full item.

How quickly will I receive my paint matched to Benjamin Moore GX-236A?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Benjamin Moore GX-236A depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
What are the RGB, HEX and LRV values for Benjamin Moore GX-236A?
The RGB values for Benjamin Moore GX-236A are 87, 52, 47 and the HEX code is #57342F. The LRV for Benjamin Moore GX-236A is 4.67. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about Light Reflectance Values and using RGB and Hex codes for paint.
What is spray paint matched to Benjamin Moore GX-236A made of? And how much area will one can cover?

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore GX-236A enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

Is Benjamin Moore Paint used to make Benjamin Moore GX-236A?

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

Can I buy Benjamin Moore GX-236A locally?
You would have to ask around locally. MyPerfectColor can make and ship the Benjamin Moore GX-236A in a variety of paint types, but we are not able to comment on what other suppliers can provide. MyPerfectColor is not just working off a formula in a database - we compare every batch against the original color to verify the color accuracy. MyPerfectColor has extensive color matching capabilities and more than ten times the number of pigments available to a typical paint store.
How do I convert Benjamin Moore GX-236A to a different color from another paint company?

While we can provide Benjamin Moore GX-236A in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.