Match of Behr™ 2A19-4 Sphinx *

The SDS is tied to the MyPerfectColor paint product and chemistry, not to the Behr color name by itself. For 2A19-4 Sphinx, check the MyPerfectColor Safety Data Sheets page for the specific product format you plan to order.

If you need the document for handling, storage, or project review, use the SDS for the MyPerfectColor product you are purchasing, since the safety information depends on the paint formulation.

Yes, MyPerfectColor spray paint matched to 2A19-4 Sphinx can work on many plastics, but plastics vary a lot and some need more prep than others. Because the actual plastic and its surface finish matter, test the paint on the real part before coating the full item.

If you want better adhesion on a difficult plastic, use the MyPerfectColor primer recommended for acrylic enamel projects. Clean the part first, then test the adhesion and color on the actual substrate so you can confirm the prep is right before finishing the job.

For 2A19-4 Sphinx in spray paint form, it is typically dry to the touch within minutes, ready for recoating in one to two hours, and fully cured in about two weeks.

That means the part may feel dry long before it has full strength. Avoid heavy handling, stacking, or reinstalling the item until it has had time to cure, and let each coat flash and dry before applying the next one.

The finish you choose for 2A19-4 Sphinx affects both appearance and use. Lower gloss finishes usually reduce reflectivity and can hide surface texture better, while higher gloss finishes are usually easier to wipe clean and can make the matched color read more vividly on the finished part.

If the item will sit beside an existing painted surface, choose the sheen that best matches the practical look of that surface. The same color can look different in matte, satin, or gloss, so the finish choice is part of getting the right result.

Before applying 2A19-4 Sphinx over metal or an existing coating, clean off dirt, grease, rust, loose paint, and any other contamination. Scuff-sanding helps the new paint bond better, especially on smooth or glossy old finishes.

Also keep in mind that the condition of the old coating, including gloss, texture, and aging, can affect how the new color reads. If the part has to sit next to untouched paint, test a small area first so you can confirm how the matched finish looks on that surface.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr 2A19-4 Sphinx enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr 2A19-4 Sphinx in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr 2A19-4 Sphinx in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.