Match of Behr™ 3A15-4 Solomon Sand *

Coverage depends on the size of the item, surface texture, how much the substrate absorbs, the application method, and how many coats you need to get even hide. For spray paint, a typical can covers about 20 square feet with one coat. For other paint formats, coverage is often about 400 to 600 square feet per gallon, but the actual amount can vary with the same factors.

If you are painting a part, fixture, or accessory in a match of 3A15-4 Solomon Sand, plan for extra product if the surface is rough, uneven, or a difficult color to cover. If you are unsure, round up rather than order too little.

Confirm the exact brand color reference, the product type you want, the sheen, and the quantity before you place the order. A MyPerfectColor order made to match 3A15-4 Solomon Sand is custom-made to that color reference, so it should be chosen carefully.

This matters because the code identifies the color target, but it does not by itself define the finish or the application conditions. Make sure the format you pick is appropriate for the item you are painting, especially if you need spray paint for a small part, fixture, or removable component.

The SDS is tied to the specific MyPerfectColor paint product and chemistry, not to the brand color name alone. To get the right document for a match of 3A15-4 Solomon Sand, check the MyPerfectColor Safety Data Sheets page for the product you plan to order.

If you are comparing different formats, such as spray paint versus another paint type, verify the SDS for that exact product rather than assuming one sheet covers every version.

Yes, but plastics vary widely, so test on the actual part whenever possible. MyPerfectColor spray paint sticks well to most plastics, but adhesion can change based on the plastic type, surface condition, and prep work.

If the part is important or the substrate is unfamiliar, use the MyPerfectColor primer to improve adhesion before applying a match of 3A15-4 Solomon Sand. That is especially useful when you want better bonding on difficult or low-energy surfaces.

Finish is a practical coating choice that changes how much light the surface reflects, which can make a match of 3A15-4 Solomon Sand read lighter, darker, or slightly different once it is applied. The color code itself does not define the sheen.

If you need the color to coordinate with an existing item, confirm the finish you are ordering before you paint. The same color reference can look different on a matte, satin, or glossier surface because the coating and substrate change the visual result.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr 3A15-4 Solomon Sand enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr 3A15-4 Solomon Sand in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr 3A15-4 Solomon Sand in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.