Match of Sherwin Williams™ SW3042 Woodland *

Use light, even coats and keep the spray moving so the film builds gradually. Hold a consistent distance from the part and overlap each pass enough to cover evenly without flooding the surface.

For SW3042 Woodland, heavy passes can create runs, uneven sheen, or a darker, muddier look on the finished item. This matters on small parts such as vents, grilles, brackets, pipe, hardware, and removable fixtures where spray application is practical.

Yes. The same SW3042 Woodland color can look different in different finishes because sheen changes how much light reflects off the coating. The color code identifies the color target, but it does not set the sheen.

If you need a specific look on the finished part, choose the finish as a practical coating decision, not just a color decision. A lower sheen will usually read differently than a higher sheen on the same surface.

Before applying a MyPerfectColor match of SW3042 Woodland, clean the surface so it is free of dirt, oil, and other contamination. If the item is being coated over metal or an existing finish, scuffing the surface can help the new coating bond better.

Also check for rust, loose coating, gloss, and texture differences. Those conditions can affect how SW3042 Woodland appears after application, especially when the new coating is next to older or uneven material.

The SDS is tied to the MyPerfectColor paint product and its chemistry, not to the SW3042 Woodland color name by itself. You can find MyPerfectColor Safety Data Sheets here: Safety Data Sheets.

If you are ordering SW3042 Woodland in a specific format, use the SDS for that product type so you are reviewing the correct safety information.

Before you order SW3042 Woodland, confirm the brand color reference, the MyPerfectColor product format, the sheen, and the quantity you need. That helps avoid ordering the wrong version of the match for your project.

Custom-made color matches are made to order, so they should be chosen carefully because they are not returnable or refundable. If you need SW3042 Woodland for spray paint, make sure the spray format is the one you want before checkout.

MyPerfectColor has an original sample of the Sherwin Williams SW3042 Woodland in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW3042 Woodland. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW3042 Woodland, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.