Match of Sherwin Williams™ SW3006 Sand Castle *

Coverage for MyPerfectColor paint matched to Sherwin Williams SW3006 Sand Castle depends on the surface size, texture, hiding power, prep, application method, and how many coats are needed. As a planning guide, spray paint often covers about 20 square feet per can with one coat, while other MyPerfectColor paint formats commonly cover about 400 to 600 square feet, depending on the product and application.

If the surface is rough, porous, dark, or uneven, plan for additional material. When the part must be fully covered or when you are coating multiple items, it is safer to order extra rather than assume one coat will be enough.

The finish you choose changes both how SW3006 Sand Castle looks and how the coated item performs. Higher gloss finishes are usually more reflective and easier to clean, while lower gloss finishes reduce reflectivity and can help downplay surface texture.

If you are matching an existing item, choose the sheen that is closest to the surface you are coating. The same color can look different in flat, satin, or gloss, so finish is part of the ordering decision, not just an appearance preference.

MyPerfectColor spray paint matched to SW3006 Sand Castle is typically dry to the touch within minutes, can usually be recoated in 1 to 2 hours, and reaches full cure in about 2 weeks.

Dry to the touch does not mean ready for handling, stacking, or reassembly. If the part will be installed or put back into use, wait long enough for the coating to support that step and allow the full cure time when a harder finish is needed.

The SDS is tied to the MyPerfectColor product or chemistry, not to the Sherwin Williams color name alone. For SW3006 Sand Castle, use the MyPerfectColor Safety Data Sheets page here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm.

If you are ordering a different MyPerfectColor format, confirm the SDS for that exact product before use.

Even after you order a match of SW3006 Sand Castle, the final look can shift with lighting, sheen, surface texture, and nearby materials. The same color can read differently on smooth metal, rough plastic, wood, or an older painted surface.

If the item will sit next to an existing surface or be seen under strong lighting, test the finish on the actual substrate first. That helps you judge the color in the conditions where it will actually be used.

MyPerfectColor has an original sample of the Sherwin Williams SW3006 Sand Castle in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW3006 Sand Castle. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW3006 Sand Castle, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.