Match of Sherwin Williams™ SW2926 Iron Gate *

Yes. A match of Sherwin Williams SW2926 Iron Gate can be ordered as MyPerfectColor custom spray paint matched to the selected brand color for projects where spray application is practical, such as trim details, fixtures, railings, vents, pipes, hardware, and other small or awkward parts.

This is usually the better format when you are coating a removable part or a surface that is hard to brush evenly. For best results, make sure the item is clean, properly prepared, and suitable for spray application before you order.

Before ordering SW2926 Iron Gate, confirm the brand color reference, the MyPerfectColor product type, the sheen you want, and the quantity you need. A custom-made match is made to your selected color reference, so choosing the wrong reference, format, or sheen can lead to a result that does not fit the project.

Custom color orders should be placed carefully because they are made specifically for that order and are not returnable or refundable.

A match of Sherwin Williams SW2926 Iron Gate can be used on many plastic parts, but plastics vary widely, so testing on the actual material is important before painting the full item. A plastic that looks similar to another plastic may still accept paint differently.

MyPerfectColor spray paint sticks well to most plastics, and using the MyPerfectColor primer can improve adhesion on difficult surfaces. If the item is a low-energy plastic or an unfamiliar substrate, test first so you can confirm adhesion and appearance before committing to the whole project.

Apply SW2926 Iron Gate in light, even coats rather than one heavy pass. Keep a consistent spray distance, overlap each pass slightly, and move at a steady pace so the film builds evenly.

Heavy application can cause runs, uneven sheen, or a muddy-looking color build. Let each coat flash and dry according to the product directions before adding the next coat, especially on items where a smooth finish matters.

For metal or painted surfaces, clean the item first, remove grease or contamination, and scuff the surface so the new coating can grip. If there is rust, loose paint, or failing coating, that needs to be addressed before applying SW2926 Iron Gate.

The condition of the old surface matters because gloss, texture, and wear can change how the finished color reads. A quick test area is a practical way to check adhesion and appearance before painting the full part.

MyPerfectColor has an original sample of the Sherwin Williams SW2926 Iron Gate in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW2926 Iron Gate. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW2926 Iron Gate, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.