Match of Pratt and Lambert™ 9-12 Warmth *

Finish changes how the same color reads after it is applied. A glossier finish reflects more light and can make a match of Pratt and Lambert 9-12 Warmth look brighter or a little deeper in contrast, while a flatter finish reduces reflection and can make the color appear softer. The color reference stays the same, but sheen changes the finished look on the item you paint.

If you are ordering MyPerfectColor paint matched to 9-12 Warmth for a part, fixture, or accessory, choose the sheen that best matches the surface you are covering or the result you need. When the painted piece will sit next to an existing coated surface, finish is one of the main factors that can make the two look different even when the color match is correct.

Primer depends on the substrate, its condition, and the paint type you are using. For a match of Pratt and Lambert 9-12 Warmth, primer is often helpful on bare, porous, glossy, repaired, or uneven surfaces because it can improve adhesion and help the color build more evenly.

MyPerfectColor custom paint matched to 9-12 Warmth can be used on many projects, but the best prep depends on what you are painting. If the surface is sound and already compatible with the topcoat, primer may not be required, but it usually does not hurt and can improve the result. Check the prep guidance for the selected product and the material you are coating before you order.

Yes, but plastics vary a lot, so testing on the actual part is important. MyPerfectColor spray paint sticks well to most plastics, and using the MyPerfectColor primer can improve adhesion on difficult or low energy plastic surfaces.

For a match of Pratt and Lambert 9-12 Warmth on items like switch covers, vents, grilles, housings, or other removable plastic parts, clean the surface well and follow the prep steps for that material. Because plastic formulations differ, a small test piece is the safest way to confirm adhesion and appearance before coating the full part.

Use several light, even coats instead of one heavy pass. Keep the spray moving, overlap each pass slightly, and avoid flooding the surface, since heavy coats can cause runs, uneven sheen, or a muddy-looking build of color.

That approach is especially useful when applying a match of Pratt and Lambert 9-12 Warmth to real project items such as PVC pipe, metal brackets, hardware, speaker grilles, baskets, or small fixtures. Light coats help the color level more predictably and make it easier to stop when the coverage looks even.

Coverage depends on the size of the surface, its texture, the hiding power of the coating, the application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other paints typically cover between 400 and 600 square feet.

For a match of Pratt and Lambert 9-12 Warmth, plan for extra material if the substrate is rough, porous, highly textured, or a strong color underneath needs to be covered. If you are coating multiple parts, such as trim pieces, fixtures, or accessories, total the area of all items and then account for the number of coats you expect to apply.

MyPerfectColor has an original sample of the Pratt and Lambert 9-12 Warmth in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

MyPerfectColor offers custom spray paint matched to Pratt and Lambert 9-12 Warmth which enables you to conveniently achieve a professional spray-smooth finish. It is difficult to gauge spray paint coverage because it depends on how you apply it and the amount of overspray, but generally the 11oz spray will cover about 20 square feet per coat.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. This paint sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

While MyPerfectColor can provide paint matched to the Pratt and Lambert 9-12 Warmth, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.