Match of Pratt and Lambert™ 5-19 Bryce Canyon *

Yes, 5-19 Bryce Canyon can be ordered as a MyPerfectColor custom spray paint match for many plastic parts, but plastics vary widely and some surfaces need extra prep to hold paint well. If the plastic is unfamiliar or the part matters, test the actual material first.

For better adhesion, use the MyPerfectColor primer for Acrylic Enamel before painting. Clean off oils or release agents, and scuff the surface if the plastic can be safely prepared that way.

Coverage for 5-19 Bryce Canyon depends on the surface size, texture, hiding power, application method, and how many coats are needed. A typical can of MyPerfectColor spray paint covers about 20 square feet with one coat. Other MyPerfectColor paint formats typically cover about 400 to 600 square feet per gallon, depending on the surface and how it is applied.

If the part is rough, porous, dark, or likely to need multiple coats, plan on extra material. Measuring the area before ordering helps reduce the risk of running short during the job.

Yes. For 5-19 Bryce Canyon, the safest way to confirm the color is with a physical swatch from the original brand or a known existing color reference, not from a screen alone. MyPerfectColor matches to the original brand color standard, so the key is making sure you have the correct source color before you order.

If you are matching an existing item, compare it under the lighting where it will be used. That helps reduce the risk of ordering a match to the wrong color version.

With 5-19 Bryce Canyon in MyPerfectColor spray paint, dry-to-touch happens within minutes, but recoating and full handling are different steps. Plan to recoat in about 1 to 2 hours, and allow about 2 weeks for full cure.

Do not stack, assemble, or put heavy wear on the part until the coating has cured enough for the job. If you apply multiple coats, the total cure time can extend.

For 5-19 Bryce Canyon on metal or over an existing coating, clean the surface first, remove contamination, and scuff glossy areas so the new coating can bond better. Check for rust, loose paint, or other surface problems before spraying.

The condition of the old coating, plus its gloss and texture, can change how 5-19 Bryce Canyon looks after it dries. If the substrate is uncertain or the finish is important, test a small area before painting the full part.

MyPerfectColor has an original sample of the Pratt and Lambert 5-19 Bryce Canyon in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

MyPerfectColor offers custom spray paint matched to Pratt and Lambert 5-19 Bryce Canyon which enables you to conveniently achieve a professional spray-smooth finish. It is difficult to gauge spray paint coverage because it depends on how you apply it and the amount of overspray, but generally the 11oz spray will cover about 20 square feet per coat.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. This paint sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

While MyPerfectColor can provide paint matched to the Pratt and Lambert 5-19 Bryce Canyon, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.