Match of Behr™ UL200-22 Amazon Jungle *

The SDS is tied to the specific MyPerfectColor product you order, not to the UL200-22 Amazon Jungle color name by itself. Check the MyPerfectColor Safety Data Sheets page for the exact paint format you plan to buy, and make sure the SDS matches that product chemistry. If you are comparing spray paint to another MyPerfectColor format, review the SDS for each one separately.

For spray paint matched to UL200-22 Amazon Jungle, expect dry to the touch within minutes, recoating in about 1 to 2 hours, and full cure in about 2 weeks. Dry to the touch does not mean fully cured, so handle the part gently until the coating has had more time to harden. If you plan multiple coats, keep them light so each coat can flash off before the next one.

Clean the surface first so dust, oil, and loose material do not interfere with adhesion. On metal, remove rust or corrosion that is already lifting, and scuff glossy or smooth areas so the new coating has some tooth. If the old coating is peeling, soft, contaminated, or unknown, test first or use a primer suited to the substrate, because the condition of the base layer can affect both adhesion and final appearance. The sheen and texture of the existing finish can still show through on the finished part even when the color match is correct.

Yes. MyPerfectColor custom spray paint matched to UL200-22 Amazon Jungle is a practical choice for small parts such as switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar items where a smooth sprayed finish is useful. Remove the part if you can, clean it, and apply light coats so details do not fill in. If the item stays in place, mask carefully and expect the final look to depend on how smooth the substrate is and how well it is prepared.

A typical can of spray paint covers about 20 square feet with one coat, but real coverage depends on surface size, texture, hiding power, spray method, and how many coats you need. Rough, porous, dark, or uneven surfaces usually need more paint than a smooth, light, well-prepared surface. For small parts like hardware or vent covers, one can may cover several pieces, but if you are coating a larger item or want multiple coats, plan extra so you do not run short mid-project. If you are using another MyPerfectColor format, coverage is much higher and is usually planned differently.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr UL200-22 Amazon Jungle enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr UL200-22 Amazon Jungle in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr UL200-22 Amazon Jungle in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.