Match of Sherwin Williams™ SW7722 Travertine *

Yes, but the result depends on the condition of the metal or old coating. Clean off dirt, grease, wax, and loose material first, and remove rust or corrosion before painting. If the existing coating is glossy or slick, scuff sanding can help the new coating bond better.

Keep in mind that the old surface can affect how SW7722 Travertine reads after application. Texture, gloss, staining, and edge wear can all change the final appearance, so a test area is the safest way to confirm the result before committing to the full part.

Choose the finish based on how the item will be used and how much reflectivity you want. The same match of SW7722 Travertine can look different in a flat, satin, semi-gloss, or gloss finish because sheen changes how much light the surface reflects.

More durable or easier-to-clean finishes are often preferred for items that will be handled often, while lower-sheen finishes can reduce shine on larger or more visible surfaces. If you are matching an existing painted item, try to match the sheen as well as the color so the finished piece looks consistent.

The SDS is tied to the MyPerfectColor product formulation, not to the SW7722 Travertine color name by itself. To get the right SDS, look up the specific MyPerfectColor product you plan to order.

MyPerfectColor Safety Data Sheets are available on the Safety Data Sheets page for the product line. If you are ordering a different format, such as spray paint or another coating type, make sure you review the SDS for that exact product before use.

Coverage depends on the surface size, texture, porosity, hiding power, application method, and the number of coats needed. A typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paints typically cover between 400 and 600 square feet, but real-world coverage can vary.

If the item is rough, porous, dark, or previously coated in a strong color, plan for more material than a smooth, light, clean surface. For best results, estimate the total area, then add extra if you expect multiple coats or difficult coverage conditions.

Plastic can be painted, but results vary by plastic type. Because some plastics are low-energy or have surface additives that affect adhesion, it is smart to test on the actual part first.

MyPerfectColor spray paint sticks well to most plastics, and using the MyPerfectColor primer can improve adhesion. If the part is important or the plastic type is unknown, do a small test before painting the full item so you can confirm adhesion and appearance.

MyPerfectColor has an original sample of the Sherwin Williams SW7722 Travertine in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW7722 Travertine. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW7722 Travertine, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.