Match of Sherwin Williams™ SW7600 Bolero *

Choose the finish based on how the part will be used and how much shine you want on the finished item. Lower gloss finishes usually reduce reflectivity and can hide handling marks better, while higher gloss finishes are easier to wipe down and make SW7600 Bolero read more reflective. Because sheen changes how the color looks, match the finish to the application first, then order the MyPerfectColor custom spray paint in that finish.

This matters on items like trim, vents, hardware, railings, or removable panels where the same color can look different in matte, satin, or gloss.

Coverage for SW7600 Bolero depends on the size, texture, and porosity of the item, plus how many coats you need for even color. As a general planning guide, a typical can of spray paint covers about 20 square feet with one coat. Other paint formats often cover about 400 to 600 square feet, but actual yield can be lower on rough, uneven, or absorbent surfaces.

If you are coating parts like pipe, fixtures, grilles, or hardware, plan extra product for test sprays and a second coat if the first coat does not hide evenly.

Apply SW7600 Bolero in light, even passes rather than one heavy coat. Keep the can moving, overlap each pass slightly, and spray at a consistent distance so the finish builds smoothly. Heavy passes can cause runs, uneven sheen, or a muddy-looking color build.

This approach is especially helpful on small parts, baskets, fixtures, and other detailed items where a smooth film build matters more than spraying fast.

Plastics vary a lot, so SW7600 Bolero should be tested on the actual material before you coat the full part. MyPerfectColor spray paint sticks well to most plastics, but some low-energy surfaces need better prep or a primer to improve adhesion. If the part is a vent, cover, pipe, bracket, or molded accessory, test a small area first and confirm the paint bonds well.

Using the MyPerfectColor primer can help improve adhesion on difficult surfaces, especially when the item will be handled often.

Before ordering SW7600 Bolero, confirm that this is the exact brand color you want from a physical swatch or a known existing painted reference, not from a screen image alone. MyPerfectColor matches to the original brand color standard, so the order should be based on the verified target color reference.

This is the safest way to avoid a mismatch when you need a match of SW7600 Bolero on a new part, a replacement piece, or a coordinated component.

MyPerfectColor has an original sample of the Sherwin Williams SW7600 Bolero in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW7600 Bolero. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW7600 Bolero, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.