Match of Sherwin Williams™ SW7598 Sierra Redwood *

Choose the finish based on how the part will be used, how much wear it will see, and how much shine you want on the finished item. Higher-gloss finishes are usually easier to wipe clean and can be more durable in use, while lower-sheen finishes reduce reflectivity and can help the surface look less pronounced.

With SW7598 Sierra Redwood, the sheen will change how the matched color reads on the final part. If you are coating a fixture, trim piece, hardware item, or other object where the surface will be handled, pick the finish that fits the application first, then order MyPerfectColor custom-matched paint in that format.

For spray paint matched to SW7598 Sierra Redwood, dry-to-touch, recoat time, and full cure are different stages. A sprayed coat may be dry to the touch within minutes, but it should usually be recoated in about 1 to 2 hours. Full cure typically takes about two weeks.

If you are coating a part that will be handled, assembled, or installed, wait for the coating to reach the handling stage before putting it into service. Dry to touch does not mean fully cured, so plan your project timing around the part's actual use, not just the first dry stage.

A match of Sherwin Williams SW7598 Sierra Redwood can still appear different after it is matched and applied because lighting, placement, sheen, and nearby surfaces all affect how the finished item reads. A color match is the starting point, but the final appearance also depends on the substrate and where the part is viewed.

If the item will sit next to an existing painted surface, or if approval is important, check the match on the actual part in the intended lighting before committing to a full project. This is especially helpful when the item is small, highly visible, or installed in mixed light.

Before applying a match of SW7598 Sierra Redwood, start by cleaning the surface and removing dust, grease, wax, and other contamination. If the surface is smooth or glossy, light scuffing may help the coating bond better, but only do so when it is appropriate for the material you are painting.

Mask off areas you do not want coated, and test on the actual surface before painting a larger area. That is especially important on plastics, metal parts, hardware, and previously coated items, where prep can affect both adhesion and the final look of the matched color.

The SDS is tied to the MyPerfectColor paint product or chemistry, not to the SW7598 Sierra Redwood color name alone. To get the correct safety information, look for the Safety Data Sheets section on MyPerfectColor and use the SDS for the specific product format you are ordering.

If you are choosing between spray paint and another format, make sure you review the SDS for that exact product before use. That avoids mixing up the brand color reference with the safety documentation for the actual MyPerfectColor paint you receive.

MyPerfectColor has an original sample of the Sherwin Williams SW7598 Sierra Redwood in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW7598 Sierra Redwood. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW7598 Sierra Redwood, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.