Match of Sherwin Williams™ SW2102 Lattice *

Coverage for SW2102 Lattice depends on the size of the part, the surface texture, how well the substrate hides, the spray method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paint formats typically cover about 400 to 600 square feet, but the actual amount depends on the product, the surface, and the coverage you need.

If you are coating a small item like trim, vents, hardware, or a removable fixture, plan for test spray and full coverage so you do not run short before the job is finished.

The SDS is tied to the MyPerfectColor product or chemistry you order, not to the SW2102 Lattice color name by itself. Use the MyPerfectColor Safety Data Sheets page here: Safety Data Sheets.

After you choose the product format, check the SDS that matches that exact MyPerfectColor paint. That is the safest way to confirm the correct safety document for your order.

Confirm SW2102 Lattice from a physical swatch from the original brand or from a known existing color reference before ordering. MyPerfectColor matches the original brand color standard, so the best check is against a real sample or an existing painted item you trust.

Do not rely on a phone or monitor image alone. Screen settings, lighting, and finish can change how SW2102 Lattice looks, and that can lead to an incorrect order.

Apply SW2102 Lattice in light, even coats and keep the can moving so the paint does not build up in one spot. Use overlapping passes and avoid heavy wet coats, since those can cause runs, uneven sheen, or color that looks muddy on the finished part.

Build coverage gradually instead of trying to cover everything in one pass. Follow the distance and dry-time instructions on the product label, and allow each coat to settle before adding the next one. This is especially important on small parts, grilles, hardware, and fixtures where excess build shows quickly.

Plastics vary a lot, so test SW2102 Lattice on the actual plastic part before coating the full item. MyPerfectColor spray paint sticks well to most plastics, but some plastics are harder to bond to and may need better prep or a primer for improved adhesion.

MyPerfectColor recommends the primer made for acrylic enamel here: Primer for Acrylic Enamel. If the part is unfamiliar, handled often, or exposed to regular use, a test application is the safest way to confirm adhesion and appearance.

MyPerfectColor has an original sample of the Sherwin Williams SW2102 Lattice in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW2102 Lattice. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW2102 Lattice, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.