Match of Sherwin Williams™ SW2052 Western Reserve Beige *

Confirm SW2052 Western Reserve Beige from a physical swatch or a known existing paint reference from the original Sherwin Williams color, not from a screen image alone. MyPerfectColor matches to the original brand color standard, so the key purchase decision is whether you have the correct source color reference before ordering.

If the item you are matching is already painted, compare against a physical reference under the same lighting you will see in use. Screen color can shift enough to cause the wrong order.

Choose the finish for SW2052 Western Reserve Beige based on how the item will be used, cleaned, and handled. Higher gloss finishes are usually easier to wipe clean and can feel more durable on frequent-touch parts, while lower sheen finishes reduce reflectivity.

The finish does not change the color target, but it does change how SW2052 Western Reserve Beige will look on the finished item. A glossier finish can make the match appear brighter and more reflective, while a flatter finish can make it read more subdued. Pick the sheen that fits the application, not just the color name.

The SDS is tied to the MyPerfectColor product or chemistry you are ordering, not to the SW2052 Western Reserve Beige color name by itself. If you need the Safety Data Sheet, use the MyPerfectColor Safety Data Sheets page for the product family you plan to buy.

MyPerfectColor Safety Data Sheets can be found here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm. If you are ordering a specific format, such as spray paint, make sure you review the SDS for that product line.

For SW2052 Western Reserve Beige in spray paint format, dry to touch is typically within minutes, recoat is usually in 1 to 2 hours, and full cure takes about 2 weeks. These are different milestones, so do not treat dry to touch as fully cured.

If you are coating parts that will be handled, assembled, or stacked, wait for the later cure stage before putting stress on the finish. Thin spray coats help the paint set up more predictably than one heavy coat.

Coverage for SW2052 Western Reserve Beige depends on the surface size, texture, hiding power, application method, and how many coats you need. As a planning guide, one can of spray paint typically covers about 20 square feet with one coat.

If you are ordering another MyPerfectColor paint format, coverage is often much higher, typically about 400 to 600 square feet, but the exact amount still depends on the substrate and the number of coats. If the surface is rough, porous, or a strong color underneath, plan for extra material.

MyPerfectColor has an original sample of the Sherwin Williams SW2052 Western Reserve Beige in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW2052 Western Reserve Beige. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW2052 Western Reserve Beige, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.